產品
Semi-Automatic Dip Soldering Machine — FD600 Series (Bracket + Solder Pot Set)
- 產品詳情
-
SEMI-AUTOMATIC SERIES · SEMI-AUTOMATIC DIP SOLDERING MACHINE (FD600 · BRACKET + SOLDER POT SET)
The FD600 series is a Semi-Automatic Dip Soldering Machine supplied as a matched set: a soldering bracket, a solder pot and a solder scraper. The operator loads the part into the bracket and starts the dip; a limit stop fixes how far the part travels into the pot, so the dipped length stays the same on every part instead of depending on the operator's hand. The bracket itself is the variable — the 599 version is a plain manual bracket, the 600 and 601 versions use a manually adjustable bracket, and the 603 version uses a hand-cranked screw bracket, also offered with a 390 mm centre distance. The FD664 build-up adds automatic solder scraping and a solder cup. Solder pot 300 × 100 × 50 mm; net weight 16.22 kg, packed weight 18.48 kg; machine 400 × 400 × 250 mm, packed 590 × 500 × 400 mm. Built to order by FD in Dongguan, Guangdong, China. In the trade the same set is also called a semi-automatic tin dipping machine or a semi-automatic solder pot machine — all these names refer to the same set.
Product ParametersModel FD600 series — 599 / 600 / 601 / 603 / FD664 Also Known As Semi-Automatic Dip Soldering Machine · Semi-Automatic Tin Dipping Machine · Semi-Automatic Solder Pot Machine Type Soldering bracket + solder pot + limit stop set Solder Pot 300 × 100 × 50 mm Bracket Versions Manual bracket (599) · manually adjustable bracket (600, 601) · hand-cranked screw bracket (603, optional 390 mm centre distance) Automatic Scraping FD664 build-up — automatic solder scraping with a solder cup Net Weight 16.22 kg Packed Weight 18.48 kg Machine Size 400 × 400 × 250 mm Packed Size 590 × 500 × 400 mm Suitable Products Transformers, magnetic rings, inductor leads and straight-pin parts Specifications are as listed in our catalogue. Bracket and tooling are made to your part drawing — send us a sample part for a proposal.
Function SetLimit stop — fixes the dip depth, so the part stops at the same point in the pot on every cycle
Soldering bracket — holds the part and its pins square to the solder surface while they are dipped
Manual bracket (599) — the plain bracket, for shops that already run their own pot and fixture
Manually adjustable bracket (600, 601) — the working height is set by hand for a different part height
Hand-cranked screw bracket (603) — a screw drives the part down and up, so the descent is controlled rather than free; also offered with a 390 mm centre distance for wider parts
Solder scraper — skims the oxide skin off the solder surface before the pins enter
FD664: automatic solder scraping + solder cup — the scraper is powered and a cup brings solder up to upright pin groups
Modular set — buy the bracket alone, the pot with the scraper, or the full set; each part of the set is a stocked line item
The set is built from standard bracket, pot and scraper modules — tell us your part height and pin layout and we will quote the matching build-up.
Product OverviewApplication FieldsTransformer Pin Soldering
Magnetic-Ring & Inductor Leads
Straight-Pin Parts
Bench-Side and Repair Work
FeaturesBracket + Pot + Limit Stop Set
Solder Pot 300 × 100 × 50 mm
Manual / Adjustable / Screw Bracket
Compact 400 × 400 × 250 mm Footprint
AdvantagesLimit Stop Keeps Depth Fixed
Low Entry Cost vs Automatic Line
Buy the Modules You Need
Factory Direct from Dongguan, China
Semi-Automatic Dip Soldering Machine RangeThe Semi-Automatic Dip Soldering Machine range covers microcontroller machines, bracket-and-pot sets and solder cup sets. Every set is built to order in Dongguan, Guangdong, China — send us your part, pin layout and output per shift for a machine recommendation and quotation.
Product Details
FD600 series overall view

Bracket and pot detail

Set configuration
Photographs are of the standard set. Bracket and tooling are adapted to your part.
Product Demo Video
▶ Watch the working video →
Application ScenariosTransformer & Inductor Pins Transformer and inductor leads are held in the bracket and dipped against the limit stop, so the tinned length matches from part to part. Bench-Side and Repair Work The 400 × 400 × 250 mm footprint and 16.22 kg net weight put the set next to the winding bench, without occupying a full machine bay. Mixed Part Heights The adjustable 600 / 601 bracket and the hand-cranked 603 screw bracket let one set cover several part heights; the 390 mm centre distance version takes wider parts. Entry Level Automation Where a full automatic line is not justified yet, the set removes the hand-held dip and is the cheapest step up from dipping by hand. How To UseSet the limit stop against the part height, so the pins enter the solder by the same depth every cycle.
Load the bracket with your transformer, magnetic ring or pin part.
Apply flux to the pin group before the part travels to the pot.
Lower the part into the pot on the adjustable or hand-cranked bracket; the screw version gives a controlled descent.
Scrape and lift the scraper clears the oxide skin on the way in, then the bracket comes back up to the stop.
Keep the pot topped up and skimmed so the solder surface stays clean through the shift.
⚠ Safety notice: molten solder operates at high temperature — never reach into the pot area while the set is in use, keep the work area dry (molten solder and water contact can cause splatter), use heat-resistant gloves during pot maintenance, and isolate the power supply before any service.Frequently Asked QuestionsQ1: What is a Semi-Automatic Dip Soldering Machine?
It is a machine that dips component pins into molten solder with the dipping motion guided by the machine and the loading and unloading done by an operator. On the FD600 series the guidance comes from the soldering bracket and its limit stop, so the pins stop at the same depth in the pot on every cycle. The same set is also called a semi-automatic tin dipping machine or a semi-automatic solder pot machine — all these names refer to the same set.
Q2: What is included in the set?
A soldering bracket with a limit stop, a solder pot measuring 300 × 100 × 50 mm, and a solder scraper. On the FD664 build-up the scraping is automatic and a solder cup is added. Because the set is modular, the bracket, the pot and the scraper can also be ordered as separate line items.
Q3: Which bracket version do I need?
It depends on how much control you want over the descent. The 599 is a plain manual bracket; the 600 and 601 use a manually adjustable bracket for setting a working height; the 603 uses a hand-cranked screw bracket for a controlled descent and is also available with a 390 mm centre distance for wider parts. If you want the scraper powered as well, take the FD664 build-up.
Q4: How much floor space and weight does it take?
The set measures 400 × 400 × 250 mm and weighs 16.22 kg net, 18.48 kg packed; the packed carton is 590 × 500 × 400 mm. It sits beside a winding bench rather than needing a machine bay.
Q5: Can the bracket be made for my part?
Yes. The set is built to order in Dongguan, Guangdong, China, and the bracket and tooling are made to your part drawing. Send us your part, pin layout and output per shift and we will propose the configuration and quotation.
Q6: Which industries use a set like this?
Transformer, magnetic-ring inductor and small motor makers, plus any workshop soldering straight-pin parts in batches on a bench — wherever leads must be dip-soldered repeatedly and the volume does not justify a full automatic line.
Need a semi-automatic soldering set for transformer or inductor pins?OEM / ODM available · Bracket + solder pot + limit stop · Solder pot 300 × 100 × 50 mm · Manual / adjustable / hand-cranked screw bracket · 400 × 400 × 250 mm footprint · Factory direct from Dongguan, China · Fixture drawing on requestGet a Quote
相關產品
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
產品詢價
請留言,我們收到後會迅速與您聯繫,感謝您的支持!
常見問題
問
香菸盒三維包裝機特點?
答
1. 更換模具時無需調節機器兩側工作臺面高度,無需拆裝出料鏈條、放料斗,將傳統機四小時的更換模具時間縮短爲只需現在30分鐘。
2. 採用新式雙保險機構,機器運行不同步時無需停機也不會損壞其它零部件。
3. 獨創的單向手搖裝置防止逆向搖動機器,且運行時手輪不會轉動使操作人員更安全。
4. 新型雙旋轉切膜刀可保證機器連續使用多年無需磨刀口,克服了傳統固定式單旋轉切膜刀刃容易磨損的缺陷。
問
全自動撲克透明膜三維包裝機包裝產品?
答
全自動撲克透明膜三維包裝機主要適用於散裝撲克、壓縮餅乾,沙琪瑪、報事貼、便箋紙、威化餅乾等散狀或多件物體集合的三維包裝。
English
繁体中文
简体中文
Deutsch
Tiếng Việt


