產品
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
- 產品詳情
-
FLOOR-STANDING SERIES · STAINLESS STEEL EXPLOSION-PROOF INDUSTRIAL OVEN FD1200800800FBB
The Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB is the all-stainless member of our floor-standing explosion-proof series: the same pressure-relief safety concept as the painted-steel models, built throughout in stainless steel for cleanroom work, corrosive loads and parts that must not meet painted surfaces. The model number encodes the 1200 × 800 × 800 mm chamber class. A working video of the oven in operation is on this page. Also listed as a stainless steel explosion-proof drying oven or a floor-standing industrial oven.
Product ParametersModel FD1200800800FBB — Stainless Steel Explosion-Proof Industrial Oven Also Known As Stainless Steel Explosion-Proof Drying Oven · Floor-Standing Industrial Oven · Explosion-Proof Industrial Oven Construction Stainless steel body (as shown in the photograph and video) Chamber class 1200 × 800 × 800 mm class (per model number; exact figures confirmed with the quotation) Safety concept Floor-standing explosion-proof series: independent pressure-relief rear door, over-temperature protection Power / voltage / temperature range Set against your process — confirmed with the quotation The listing carries no parameter table, so no figures are quoted here. Power, voltage, controller and temperature range are confirmed with the quotation for your configuration.
Function SetStainless steel throughout — the body in the photograph and video is stainless steel, so the oven suits cleanroom areas, humid workshops and parts where painted steel would contaminate or corrode.
Explosion-proof series safety — built on the floor-standing explosion-proof platform with an independent pressure-relief rear door and over-temperature protection.
1200 × 800 × 800 mm chamber class — the large-size member of the series, for big transformers, coils and bulky painted parts.
Hot-air circulation drying — same forced-circulation principle as the rest of the series, for an even temperature field across the load.
Working video on file — the oven is shown running on the video linked below, so you can see the build and the controls before you buy.
Specified with your order — power, voltage and controller options are confirmed per application, as with the rest of the floor-standing series.
Product OverviewApplication Fields Features Advantages Solvent-bearing and corrosive loads, cleanroom drying, large transformers and coils, and parts that must stay clear of painted-steel contact. Stainless steel body, explosion-proof rear-door safety concept, 1200 × 800 × 800 mm class chamber, working video on file. The stainless answer inside the explosion-proof range — same platform, same safety chain, corrosion-proof shell. Explosion-Proof Oven RangeStandard (non explosion-proof) cabinet ovens are listed in the standard series — ask for both series with your enquiry.
Product Details
Overall view of the stainless steel body

Control side with function markings
The listing currently carries one photograph; further photographs of your configuration can be taken before shipment on request.
Product Demo Video
▶ Watch the working video (opens in a new tab)
The video shows the oven in operation on the factory floor.
Application ScenariosCleanroom & lab lines Stainless shell wipes down and does not shed paint, so the oven can sit inside controlled areas. Corrosive workloads Drying after flux, plating or wash processes that would eat into a painted housing over time. Large solvent loads Bulky freshly coated or washed parts in the 1200 × 800 × 800 mm class — big enough for full trolley-size work. How To UseInstall the oven with its rear panel facing a wall at the clearance stated on the drawings, so the relief door can open freely.
Connect the supply confirmed in your order and load the chamber evenly.
Set the working temperature and soak time on the controller confirmed with your configuration.
Start the run; the forced hot-air circulation evens the temperature across the load.
The alarm sounds and heating cuts at the end of the set time or at the over-temperature point.
After the shift, switch off, vent the chamber, and wipe the stainless interior once it has cooled.
Safety note: never block or wall over the explosion-proof rear door — it is the pressure-relief path. Keep the room ventilated when drying solvent-bearing parts.
FAQQ1: What does the model number FD1200800800FBB mean?
A: It encodes the 1200 × 800 × 800 mm chamber class of the explosion-proof series; the exact internal figures are confirmed with the quotation.
Q2: Why choose the stainless version?
A: Cleanrooms, humid or corrosive environments, and any product that must not touch painted steel — the stainless shell does not shed coating and wipes clean.
Q3: Is there a working video?
A: Yes — the video on this page shows the oven running; ask for a longer clip of your configuration if needed.
Q4: Does it have the pressure-relief rear door?
A: Yes — it belongs to the floor-standing explosion-proof series, whose safety concept is the independent pressure-relief rear door plus over-temperature protection.
Q5: What are the power and temperature specifications?
A: The listing does not print them, so we do not quote figures here — power, voltage and temperature range are confirmed with the quotation for your configuration.
Q6: Can I see it in the painted-steel version too?
A: Yes — the series includes the multi-size painted-steel model and the trolley-loading floor model; see the range table above.
Need a quotation for the FD1200800800FBB?
Tell us your load and environment — we confirm the stainless configuration and full datasheet with the quotation.
Get a Quote
相關產品
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
產品詢價
請留言,我們收到後會迅速與您聯繫,感謝您的支持!
常見問題
問
香菸盒三維包裝機特點?
答
1. 更換模具時無需調節機器兩側工作臺面高度,無需拆裝出料鏈條、放料斗,將傳統機四小時的更換模具時間縮短爲只需現在30分鐘。
2. 採用新式雙保險機構,機器運行不同步時無需停機也不會損壞其它零部件。
3. 獨創的單向手搖裝置防止逆向搖動機器,且運行時手輪不會轉動使操作人員更安全。
4. 新型雙旋轉切膜刀可保證機器連續使用多年無需磨刀口,克服了傳統固定式單旋轉切膜刀刃容易磨損的缺陷。
問
全自動撲克透明膜三維包裝機包裝產品?
答
全自動撲克透明膜三維包裝機主要適用於散裝撲克、壓縮餅乾,沙琪瑪、報事貼、便箋紙、威化餅乾等散狀或多件物體集合的三維包裝。
English
繁体中文
简体中文
Deutsch
Tiếng Việt

