產品
Double Cylinder Lead Cutting & Forming Machine for Magnetic Ring Inductors - FD-6320 to FD-10050 Series
- 產品詳情
-
Product Parameters
Product Type Lead cutting / forming machine for magnetic ring inductors Drive Mode Pneumatic cylinder (single-cylinder / double-cylinder) Cutting Blade Hardness HRC 59 Cutting Board Material D2 / SKD11 / SKH-9 (per model) Wire Diameter Range 0.3 – 2.5 mm (per model) Lead Pitch / Row Pitch Up to 90 × 70 mm (per model) Power Supply 220 V (air supply required for pneumatic models) Machine Size (FD6330) 300 × 160 mm base; 135 × 100 mm top Standard Accessory 1 × cutting board included Place of Origin Dongguan, Guangdong, China Specifications are for reference. Air supply pressure, voltage and cutting board size can be customized according to your production line — contact us for the full datasheet.
Accessories & Spare PartsCutting board (lead cutting plate) × 1 — included with the machine
Replacement cutting board — available separately, choose D2 / SKD11 / SKH-9
Pneumatic cylinder and air hose / fittings — spare parts available
Cutting blade — HRC 59 hardened, replaceable
Foot switch / control cable — for manual-trigger operation
Operation manual × 1
Cutting boards are the main wearing part. Tell us your lead pitch / row pitch and wire diameter, and we will supply a matching board.
User ManualOperating instructions, cutting board replacement and maintenance guide
USER MANUAL PDFEnglish manual available. Chinese manual and wiring / air-circuit diagram available on request.
Product Demo Video
▶ Watch the forming & cutting demo (opens in a new tab)
This clip shows the forming-type cutting machine. Working videos of the single-cylinder, side-type and vertical models are available on request.
Product OverviewApplication FieldsMagnetic Ring / Toroidal Inductors
Common Mode Chokes & Filters
Transformer Lead Forming
Electronic Component Assembly
FeaturesClean Cut, No Burr, No Copper Damage
Cutting + Forming in One Stroke
Cutting Blade Hardness HRC 59
High Output, Low Noise
AdvantagesD2 / SKD11 / SKH-9 Cutting Boards
Factory Direct Price
Board Made to Your Pitch & Wire Size
After-sales Support & Spare Parts
Product Type · Lead Cutting Machine SeriesNot sure which model fits your component? Send us a sample or a drawing — we will recommend the right machine and cutting board.
Model Comparison · Forming TypeMachine Model Max. Lead Pitch × Row Pitch Max. Copper Wire Diameter Matching Cutting Board FD-6320 25 × 25 mm 1.5 mm 6320 board — material D2 FD-8020 25 × 25 mm 2.0 mm 8020 board — material D2 FD-8040 50 × 50 mm 2.0 mm 8040 board — material SKD11 FD-8040A 50 × 50 mm 2.5 mm 8040A board — material SKD11 FD-10040 60 × 60 mm 2.5 mm 10040 board — material SKD11 FD-10050 90 × 70 mm 2.5 mm 10050 board — material SKH-9 FD6330 (single cylinder) Lead pitch 75 mm / row pitch 75 mm 2.0 mm 1 × cutting board included Other pitches and board materials are available on request. The cutting board is matched to your component, so please confirm the pitch, row pitch and wire diameter before ordering.
Product Details
FD6330 single-cylinder lead cutting machine

Pneumatic cylinder & cutting head

Cutting board & HRC 59 blade

Base & working platform (300 × 160 mm)

Forming-type cutting machine

Side-type LYY-QJJ-C (dual cylinder)

Vertical pull type LYY-QJJ-L

Cutting result — clean, burr-free leads
Application ScenariosMagnetic Ring Inductors Cutting and forming the leads of toroidal inductors and chokes to a fixed pitch, so the part drops straight into the PCB or the winding fixture. Common Mode Chokes Uniform lead length and pitch for filter and choke components — repeatable results shift after shift. Transformer Lead Forming Pre-forming and cutting transformer lead-out wires before winding, reducing touch-up work at the soldering station. Component Assembly Lines Suitable for both sample workshop and volume production; pneumatic models keep operator fatigue low. How To UseInstall the cutting board matching your component's lead pitch and row pitch, and lock it in place.
Connect the air supply (pneumatic models) and set the working pressure on the regulator — a stable 0.4–0.6 MPa is normally recommended.
Place the magnetic ring or component onto the cutting board so that all leads rest in the board slots.
Press the foot switch — the cylinder drives the blade down and cuts / forms all leads in one stroke.
Remove the finished part and check the lead length and pitch against the drawing.
Replace the cutting board when the cut edge starts to burr — the board is the wearing part, not the machine.
After use switch off the power and air supply, and clean metal chips from the board and blade area.
⚠ Safety notice: the blade is sharp and the cylinder moves fast — keep hands clear of the cutting area, never operate without the guard fitted, and isolate power and air before changing the cutting board.Need a cutting solution for your component?OEM / ODM available · Custom cutting board to your pitch · Factory direct from Dongguan, China · Spare parts supplied · Sample testing supportedGet a Quote
相關產品
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
產品詢價
請留言,我們收到後會迅速與您聯繫,感謝您的支持!
常見問題
問
香菸盒三維包裝機特點?
答
1. 更換模具時無需調節機器兩側工作臺面高度,無需拆裝出料鏈條、放料斗,將傳統機四小時的更換模具時間縮短爲只需現在30分鐘。
2. 採用新式雙保險機構,機器運行不同步時無需停機也不會損壞其它零部件。
3. 獨創的單向手搖裝置防止逆向搖動機器,且運行時手輪不會轉動使操作人員更安全。
4. 新型雙旋轉切膜刀可保證機器連續使用多年無需磨刀口,克服了傳統固定式單旋轉切膜刀刃容易磨損的缺陷。
問
全自動撲克透明膜三維包裝機包裝產品?
答
全自動撲克透明膜三維包裝機主要適用於散裝撲克、壓縮餅乾,沙琪瑪、報事貼、便箋紙、威化餅乾等散狀或多件物體集合的三維包裝。
English
繁体中文
简体中文
Deutsch
Tiếng Việt