Sản phẩm
Double Cylinder Lead Cutting & Forming Machine for Magnetic Ring Inductors - FD-6320 to FD-10050 Series
- Product details
-
Product Parameters
Product Type Lead cutting / forming machine for magnetic ring inductors Drive Mode Pneumatic cylinder (single-cylinder / double-cylinder) Cutting Blade Hardness HRC 59 Cutting Board Material D2 / SKD11 / SKH-9 (per model) Wire Diameter Range 0.3 – 2.5 mm (per model) Lead Pitch / Row Pitch Up to 90 × 70 mm (per model) Power Supply 220 V (air supply required for pneumatic models) Machine Size (FD6330) 300 × 160 mm base; 135 × 100 mm top Standard Accessory 1 × cutting board included Place of Origin Dongguan, Guangdong, China Specifications are for reference. Air supply pressure, voltage and cutting board size can be customized according to your production line — contact us for the full datasheet.
Accessories & Spare PartsCutting board (lead cutting plate) × 1 — included with the machine
Replacement cutting board — available separately, choose D2 / SKD11 / SKH-9
Pneumatic cylinder and air hose / fittings — spare parts available
Cutting blade — HRC 59 hardened, replaceable
Foot switch / control cable — for manual-trigger operation
Operation manual × 1
Cutting boards are the main wearing part. Tell us your lead pitch / row pitch and wire diameter, and we will supply a matching board.
User ManualOperating instructions, cutting board replacement and maintenance guide
USER MANUAL PDFEnglish manual available. Chinese manual and wiring / air-circuit diagram available on request.
Product Demo Video
▶ Watch the forming & cutting demo (opens in a new tab)
This clip shows the forming-type cutting machine. Working videos of the single-cylinder, side-type and vertical models are available on request.
Product OverviewApplication FieldsMagnetic Ring / Toroidal Inductors
Common Mode Chokes & Filters
Transformer Lead Forming
Electronic Component Assembly
FeaturesClean Cut, No Burr, No Copper Damage
Cutting + Forming in One Stroke
Cutting Blade Hardness HRC 59
High Output, Low Noise
AdvantagesD2 / SKD11 / SKH-9 Cutting Boards
Factory Direct Price
Board Made to Your Pitch & Wire Size
After-sales Support & Spare Parts
Product Type · Lead Cutting Machine SeriesNot sure which model fits your component? Send us a sample or a drawing — we will recommend the right machine and cutting board.
Model Comparison · Forming TypeMachine Model Max. Lead Pitch × Row Pitch Max. Copper Wire Diameter Matching Cutting Board FD-6320 25 × 25 mm 1.5 mm 6320 board — material D2 FD-8020 25 × 25 mm 2.0 mm 8020 board — material D2 FD-8040 50 × 50 mm 2.0 mm 8040 board — material SKD11 FD-8040A 50 × 50 mm 2.5 mm 8040A board — material SKD11 FD-10040 60 × 60 mm 2.5 mm 10040 board — material SKD11 FD-10050 90 × 70 mm 2.5 mm 10050 board — material SKH-9 FD6330 (single cylinder) Lead pitch 75 mm / row pitch 75 mm 2.0 mm 1 × cutting board included Other pitches and board materials are available on request. The cutting board is matched to your component, so please confirm the pitch, row pitch and wire diameter before ordering.
Product Details
FD6330 single-cylinder lead cutting machine

Pneumatic cylinder & cutting head

Cutting board & HRC 59 blade

Base & working platform (300 × 160 mm)

Forming-type cutting machine

Side-type LYY-QJJ-C (dual cylinder)

Vertical pull type LYY-QJJ-L

Cutting result — clean, burr-free leads
Application ScenariosMagnetic Ring Inductors Cutting and forming the leads of toroidal inductors and chokes to a fixed pitch, so the part drops straight into the PCB or the winding fixture. Common Mode Chokes Uniform lead length and pitch for filter and choke components — repeatable results shift after shift. Transformer Lead Forming Pre-forming and cutting transformer lead-out wires before winding, reducing touch-up work at the soldering station. Component Assembly Lines Suitable for both sample workshop and volume production; pneumatic models keep operator fatigue low. How To UseInstall the cutting board matching your component's lead pitch and row pitch, and lock it in place.
Connect the air supply (pneumatic models) and set the working pressure on the regulator — a stable 0.4–0.6 MPa is normally recommended.
Place the magnetic ring or component onto the cutting board so that all leads rest in the board slots.
Press the foot switch — the cylinder drives the blade down and cuts / forms all leads in one stroke.
Remove the finished part and check the lead length and pitch against the drawing.
Replace the cutting board when the cut edge starts to burr — the board is the wearing part, not the machine.
After use switch off the power and air supply, and clean metal chips from the board and blade area.
⚠ Safety notice: the blade is sharp and the cylinder moves fast — keep hands clear of the cutting area, never operate without the guard fitted, and isolate power and air before changing the cutting board.Need a cutting solution for your component?OEM / ODM available · Custom cutting board to your pitch · Factory direct from Dongguan, China · Spare parts supplied · Sample testing supportedGet a Quote
related products
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
Yêu cầu sản phẩm
Vui lòng để lại tin nhắn của bạn, chúng tôi sẽ liên hệ với bạn nhanh chóng sau khi nhận được nó, cảm ơn bạn đã hỗ trợ của bạn!
common problem
Q
What are the characteristics of cigarette box three-dimensional packaging machine?
A
1. There is no need to adjust the height of the countertops on both sides of the machine when changing the mold, and there is no need to disassemble and assemble the discharge chain or put the hopper, which shortens the four-hour mold replacement time of the traditional machine to only 30 minutes.
2. Adopting a new dual insurance mechanism, the machine does not need to be shut down when it is not running synchronously, nor will it damage other parts.
3. The original one-way hand crank device prevents the machine from shaking in reverse, and the handwheel does not rotate during operation, making the operator safer.
4. The new double rotary film cutting knife can ensure that the machine can be used continuously for many years without a sharpening port, overcoming the defect that the traditional fixed single rotary film cutting blade is easy to wear.
Q
Automatic poker transparent film three-dimensional packaging machine packaging products?
A
Automatic poker transparent film three-dimensional packaging machine is mainly suitable for bulk poker, compressed biscuits, sachima, stickers, sticky notes, wafer biscuits and other bulk or multi-object collection of three-dimensional packaging.
Địa chỉ email:
Đường dây nóng:
English
繁体中文
简体中文
Deutsch
Tiếng Việt