產品
CNC Automatic Dip Soldering & Tin Dipping Machine — FD887 Rotary Type
- 產品詳情
-
AUTOMATIC SERIES · CNC-CONTROLLED AUTOMATIC DIP SOLDERING MACHINE (FD887 · ROTARY TYPE)
The FD887 is a CNC-Controlled Automatic Dip Soldering Machine built for transformer, magnetic-ring, SMD, straight-pin and special-shaped-pin parts. The head moves up and down on a stepper motor with 0.2 mm repeatability, and the rotary axis turns 360° on a stepper motor with 0.5° accuracy, with both ends of the rotary axis driven in sync. The part can keep rotating while it is being dipped, so flux and solder coverage stay even; the CNC controller stores 999 programs, so a product change takes about one second. Built to order by FD in Dongguan, Guangdong, China. In the trade the same machine is also called an automatic tin dipping machine, a CNC-Controlled Automatic Dip Soldering Machine or a lead tinning machine — "CNC" only describes the controller that runs the stored dip program; all these names refer to the same machine.
Product ParametersModel FD-887 Also Known As CNC-Controlled Automatic Dip Soldering Machine · Automatic Tin Dipping Machine · Automatic Tinning Machine Functions Up/down · 360° rotation · translation · solder-surface detection Motion Stepper up/down · stepper rotation · cylinder + rail translation Accuracy ±0.2 mm vertical · ±0.5° rotary Translation Stroke Adjustable, up to 30 mm Controller CNC controller system Heating Variable-frequency temperature control Solder Pot Ceramic eco solder pot, corrosion resistant Program Memory 999 steps · product change in about 1 second Base Plate 10 mm, for stable running Suitable Products Transformers, magnetic rings, SMD, straight-pin & special-shaped-pin parts Specifications are as listed in our catalogue. Fixtures and tooling are made to your part drawing — send us a sample part for a proposal.
Function SetStepper up/down — 0.2 mm repeatability, so the dipped length on the pin stays the same batch after batch
360° stepper rotation — 0.5° accuracy, both ends of the rotary axis driven in sync
Dip and rotate at the same time — rotation continues after the dip for even solder coverage
Translation on cylinder + rail — stroke is adjustable up to 30 mm
Solder-surface detection — the head tracks the solder level instead of assuming a fixed height
999-program memory — one product change takes about one second on the adjustable platform
Ceramic eco solder pot — corrosion resistant for a longer pot life
Built-in fume extraction and lighting — the working point stays visible and ventilated
These are the standard functions of the FD887 platform as supplied. Function combinations can be adapted to your process — tell us your soldering sequence and we will quote a matching configuration.
Product OverviewApplication FieldsTransformer Pin Soldering
Magnetic-Ring Inductors
SMD & Straight-Pin Parts
Special-Shaped Pins
Features360° Rotary Head
±0.2 mm Vertical Accuracy
CNC Control · 999 Programs
Ceramic Eco Solder Pot
AdvantagesDip and Rotate in One Cycle
One-Second Product Change
Fume Extraction Built In
Factory Direct from Dongguan, China
CNC-Controlled Automatic Dip Soldering Machine RangeThe CNC-Controlled Automatic Dip Soldering Machine range covers rotary, auto-scraper, solder-cup and left-lift models. Every machine is built to order in Dongguan, Guangdong, China — send us your part, pin layout and output per shift for a machine recommendation and quotation.
Product Details
FD887 overall view

Working area

Function diagram
Photographs are of the standard model. Fixtures are adapted to your part.
Product Demo Video
▶ Watch the working video →
Application ScenariosTransformer & Magnetic-Ring Dipping Transformer and magnetic-ring leads are dipped with a 360° rotary head, so solder builds evenly around each pin in one cycle. Straight & Special-Shaped Pins The platform is supplied with fixtures for straight-pin and special-shaped-pin parts; the adjustable working platform is set to your part height. Dip and Rotate Together For parts that need solder pulled around the pin, rotation can continue while the part is dipped instead of stopping at the pot. Consistent Depth Over a Shift Vertical accuracy of 0.2 mm and solder-surface detection keep the dipped length stable from the first part to the last. How To UseLoad the fixture with your transformer, magnetic ring or pin part — the platform height is set once for the batch.
Apply flux to the pin group before the part travels to the pot.
Dip with the rotary head the stepper lowers the part into the ceramic eco pot and the 360° axis turns at the same time so solder wets evenly around the pin.
Let it keep rotating rotation can continue after the dip to pull the solder fillet around the pin instead of forming a lump.
Unload and repeat the CNC controller repeats the stored program for the whole batch; switching to another product takes about one second.
Keep the pot topped up and skimmed so the solder surface stays clean; solder-surface detection then tracks the level through the shift.
⚠ Safety notice: molten solder operates at high temperature — never reach into the pot area while the machine runs, keep the work area dry (molten solder and water contact can cause splatter), use heat-resistant gloves during pot maintenance, and isolate the power supply before any service.Frequently Asked QuestionsQ1: What is a CNC-Controlled Automatic Dip Soldering Machine?
It is a machine that dips component pins into molten solder automatically instead of by hand, with the motion of the head controlled by a CNC controller. The FD887 is built for transformer, magnetic-ring, SMD, straight-pin and special-shaped-pin parts: the head moves up and down on a stepper motor and the rotary axis turns 360°, so the dipped length and the solder fillet stay consistent. The same machine is also called an automatic tin dipping machine, a CNC-Controlled Automatic Dip Soldering Machine or a lead tinning machine — "CNC" only describes the controller that runs the stored dip program; all these names refer to the same machine.
Q2: What does CNC control on this machine?
The stored soldering program. The FD887 stores 999 steps, so the up/down, rotation, translation and dwell times are run by the controller instead of by an operator's hand, and a product change takes about one second.
Q3: How accurate is the dip?
The stepper-driven vertical axis holds 0.2 mm repeatability and the rotary axis holds 0.5°, with both ends of the rotary axis driven in sync. Solder-surface detection then follows the falling solder level, so the dipped length stays the same across a shift.
Q4: Why does the head rotate while dipping?
Rotating during the dip, or continuing to rotate after it, pulls solder around the whole pin instead of letting it build up on one side — it is what makes straight and special-shaped pins come out with an even coating.
Q5: Can it be adapted to my part and fixture?
Yes. The machine is built to order in Dongguan, Guangdong, China, and the platform and fixtures are made to your part drawing. Send us your part, pin layout and output per shift and we will propose the configuration and quotation.
Q6: Which industries use a CNC-Controlled Automatic Dip Soldering Machine like this?
Transformer, magnetic-ring inductor and SMD makers, plus any workshop soldering straight-pin or special-shaped-pin parts in batches — wherever leads must be dip-soldered with repeatable results.
Need automatic dip soldering for transformers, magnetic rings or pin parts?OEM / ODM available · 360° rotary head · CNC control, 999 programs · Ceramic eco solder pot · Factory direct from Dongguan, China · Fixture drawing on requestGet a Quote
相關產品
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
產品詢價
請留言,我們收到後會迅速與您聯繫,感謝您的支持!
常見問題
問
香菸盒三維包裝機特點?
答
1. 更換模具時無需調節機器兩側工作臺面高度,無需拆裝出料鏈條、放料斗,將傳統機四小時的更換模具時間縮短爲只需現在30分鐘。
2. 採用新式雙保險機構,機器運行不同步時無需停機也不會損壞其它零部件。
3. 獨創的單向手搖裝置防止逆向搖動機器,且運行時手輪不會轉動使操作人員更安全。
4. 新型雙旋轉切膜刀可保證機器連續使用多年無需磨刀口,克服了傳統固定式單旋轉切膜刀刃容易磨損的缺陷。
問
全自動撲克透明膜三維包裝機包裝產品?
答
全自動撲克透明膜三維包裝機主要適用於散裝撲克、壓縮餅乾,沙琪瑪、報事貼、便箋紙、威化餅乾等散狀或多件物體集合的三維包裝。
English
繁体中文
简体中文
Deutsch
Tiếng Việt

