Sản phẩm
CNC Automatic Dip Soldering & Tin Dipping Machine — FD887 Rotary Type
- Product details
-
AUTOMATIC SERIES · CNC-CONTROLLED AUTOMATIC DIP SOLDERING MACHINE (FD887 · ROTARY TYPE)
The FD887 is a CNC-Controlled Automatic Dip Soldering Machine built for transformer, magnetic-ring, SMD, straight-pin and special-shaped-pin parts. The head moves up and down on a stepper motor with 0.2 mm repeatability, and the rotary axis turns 360° on a stepper motor with 0.5° accuracy, with both ends of the rotary axis driven in sync. The part can keep rotating while it is being dipped, so flux and solder coverage stay even; the CNC controller stores 999 programs, so a product change takes about one second. Built to order by FD in Dongguan, Guangdong, China. In the trade the same machine is also called an automatic tin dipping machine, a CNC-Controlled Automatic Dip Soldering Machine or a lead tinning machine — "CNC" only describes the controller that runs the stored dip program; all these names refer to the same machine.
Product ParametersModel FD-887 Also Known As CNC-Controlled Automatic Dip Soldering Machine · Automatic Tin Dipping Machine · Automatic Tinning Machine Functions Up/down · 360° rotation · translation · solder-surface detection Motion Stepper up/down · stepper rotation · cylinder + rail translation Accuracy ±0.2 mm vertical · ±0.5° rotary Translation Stroke Adjustable, up to 30 mm Controller CNC controller system Heating Variable-frequency temperature control Solder Pot Ceramic eco solder pot, corrosion resistant Program Memory 999 steps · product change in about 1 second Base Plate 10 mm, for stable running Suitable Products Transformers, magnetic rings, SMD, straight-pin & special-shaped-pin parts Specifications are as listed in our catalogue. Fixtures and tooling are made to your part drawing — send us a sample part for a proposal.
Function SetStepper up/down — 0.2 mm repeatability, so the dipped length on the pin stays the same batch after batch
360° stepper rotation — 0.5° accuracy, both ends of the rotary axis driven in sync
Dip and rotate at the same time — rotation continues after the dip for even solder coverage
Translation on cylinder + rail — stroke is adjustable up to 30 mm
Solder-surface detection — the head tracks the solder level instead of assuming a fixed height
999-program memory — one product change takes about one second on the adjustable platform
Ceramic eco solder pot — corrosion resistant for a longer pot life
Built-in fume extraction and lighting — the working point stays visible and ventilated
These are the standard functions of the FD887 platform as supplied. Function combinations can be adapted to your process — tell us your soldering sequence and we will quote a matching configuration.
Product OverviewApplication FieldsTransformer Pin Soldering
Magnetic-Ring Inductors
SMD & Straight-Pin Parts
Special-Shaped Pins
Features360° Rotary Head
±0.2 mm Vertical Accuracy
CNC Control · 999 Programs
Ceramic Eco Solder Pot
AdvantagesDip and Rotate in One Cycle
One-Second Product Change
Fume Extraction Built In
Factory Direct from Dongguan, China
CNC-Controlled Automatic Dip Soldering Machine RangeThe CNC-Controlled Automatic Dip Soldering Machine range covers rotary, auto-scraper, solder-cup and left-lift models. Every machine is built to order in Dongguan, Guangdong, China — send us your part, pin layout and output per shift for a machine recommendation and quotation.
Product Details
FD887 overall view

Working area

Function diagram
Photographs are of the standard model. Fixtures are adapted to your part.
Product Demo Video
▶ Watch the working video →
Application ScenariosTransformer & Magnetic-Ring Dipping Transformer and magnetic-ring leads are dipped with a 360° rotary head, so solder builds evenly around each pin in one cycle. Straight & Special-Shaped Pins The platform is supplied with fixtures for straight-pin and special-shaped-pin parts; the adjustable working platform is set to your part height. Dip and Rotate Together For parts that need solder pulled around the pin, rotation can continue while the part is dipped instead of stopping at the pot. Consistent Depth Over a Shift Vertical accuracy of 0.2 mm and solder-surface detection keep the dipped length stable from the first part to the last. How To UseLoad the fixture with your transformer, magnetic ring or pin part — the platform height is set once for the batch.
Apply flux to the pin group before the part travels to the pot.
Dip with the rotary head the stepper lowers the part into the ceramic eco pot and the 360° axis turns at the same time so solder wets evenly around the pin.
Let it keep rotating rotation can continue after the dip to pull the solder fillet around the pin instead of forming a lump.
Unload and repeat the CNC controller repeats the stored program for the whole batch; switching to another product takes about one second.
Keep the pot topped up and skimmed so the solder surface stays clean; solder-surface detection then tracks the level through the shift.
⚠ Safety notice: molten solder operates at high temperature — never reach into the pot area while the machine runs, keep the work area dry (molten solder and water contact can cause splatter), use heat-resistant gloves during pot maintenance, and isolate the power supply before any service.Frequently Asked QuestionsQ1: What is a CNC-Controlled Automatic Dip Soldering Machine?
It is a machine that dips component pins into molten solder automatically instead of by hand, with the motion of the head controlled by a CNC controller. The FD887 is built for transformer, magnetic-ring, SMD, straight-pin and special-shaped-pin parts: the head moves up and down on a stepper motor and the rotary axis turns 360°, so the dipped length and the solder fillet stay consistent. The same machine is also called an automatic tin dipping machine, a CNC-Controlled Automatic Dip Soldering Machine or a lead tinning machine — "CNC" only describes the controller that runs the stored dip program; all these names refer to the same machine.
Q2: What does CNC control on this machine?
The stored soldering program. The FD887 stores 999 steps, so the up/down, rotation, translation and dwell times are run by the controller instead of by an operator's hand, and a product change takes about one second.
Q3: How accurate is the dip?
The stepper-driven vertical axis holds 0.2 mm repeatability and the rotary axis holds 0.5°, with both ends of the rotary axis driven in sync. Solder-surface detection then follows the falling solder level, so the dipped length stays the same across a shift.
Q4: Why does the head rotate while dipping?
Rotating during the dip, or continuing to rotate after it, pulls solder around the whole pin instead of letting it build up on one side — it is what makes straight and special-shaped pins come out with an even coating.
Q5: Can it be adapted to my part and fixture?
Yes. The machine is built to order in Dongguan, Guangdong, China, and the platform and fixtures are made to your part drawing. Send us your part, pin layout and output per shift and we will propose the configuration and quotation.
Q6: Which industries use a CNC-Controlled Automatic Dip Soldering Machine like this?
Transformer, magnetic-ring inductor and SMD makers, plus any workshop soldering straight-pin or special-shaped-pin parts in batches — wherever leads must be dip-soldered with repeatable results.
Need automatic dip soldering for transformers, magnetic rings or pin parts?OEM / ODM available · 360° rotary head · CNC control, 999 programs · Ceramic eco solder pot · Factory direct from Dongguan, China · Fixture drawing on requestGet a Quote
related products
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
Yêu cầu sản phẩm
Vui lòng để lại tin nhắn của bạn, chúng tôi sẽ liên hệ với bạn nhanh chóng sau khi nhận được nó, cảm ơn bạn đã hỗ trợ của bạn!
common problem
Q
What are the characteristics of cigarette box three-dimensional packaging machine?
A
1. There is no need to adjust the height of the countertops on both sides of the machine when changing the mold, and there is no need to disassemble and assemble the discharge chain or put the hopper, which shortens the four-hour mold replacement time of the traditional machine to only 30 minutes.
2. Adopting a new dual insurance mechanism, the machine does not need to be shut down when it is not running synchronously, nor will it damage other parts.
3. The original one-way hand crank device prevents the machine from shaking in reverse, and the handwheel does not rotate during operation, making the operator safer.
4. The new double rotary film cutting knife can ensure that the machine can be used continuously for many years without a sharpening port, overcoming the defect that the traditional fixed single rotary film cutting blade is easy to wear.
Q
Automatic poker transparent film three-dimensional packaging machine packaging products?
A
Automatic poker transparent film three-dimensional packaging machine is mainly suitable for bulk poker, compressed biscuits, sachima, stickers, sticky notes, wafer biscuits and other bulk or multi-object collection of three-dimensional packaging.
Địa chỉ email:
Đường dây nóng:
English
繁体中文
简体中文
Deutsch
Tiếng Việt

