產品
Vertical Automatic Dip Soldering Machine for Transformers — 987ZL-360
- 產品詳情
-
AUTOMATIC SERIES · VERTICAL AUTOMATIC TIN DIPPING MACHINE (TRANSFORMER TYPE)
The 987ZL-360 is a floor-standing vertical automatic dip soldering machine built for transformers. Parts are loaded in matrix trays and handled by an integrated pick-and-clamp head, so dip soldering runs without an operator holding the work. Built to order by FD in Dongguan, Guangdong, China. In the transformer trade it is usually called an automatic tin dipping machine or a dip tin machine; in general electronics it is an automatic dip soldering machine — the same equipment, soldering the transformer leads automatically.
Product ParametersModel 987ZL-360 Also Known As Automatic tin dipping machine · dip tin machine · automatic dip soldering machine Suitable Products Transformers (dedicated model) Loading / Unloading Integrated pick-and-clamp, matrix loading Machine Size (vertical) W800 × L1050 × H1550 mm Wooden Case Size 1650 × 1200 × 1000 mm Weight 300 kg Shipping Weight (settlement) 400 kg Installation Floor-standing, vertical Specifications are as listed in our catalogue. Tray layouts and pot configurations are adapted to your transformer dimensions — send us your drawing for a proposal.
Automatic Loading & UnloadingThe 987ZL-360 uses an integrated pick-and-clamp head with matrix loading: transformers are placed in tray positions, and the machine picks, holds, dips and releases each part automatically. This is what removes the operator from the soldering step — the work never needs to be held over the pot by hand.
Step What the machine does 1 · Matrix loading Transformers are set in the matrix tray positions — one tray holds a full batch. 2 · Pick & clamp The integrated head picks each part and clamps it in the soldering position. 3 · Dip soldering The leads are dipped into the molten solder automatically, at controlled angle and depth. 4 · Release The head returns the soldered part to the tray position for unloading. This is the standard 987 vertical platform. Function combinations can be adapted to your process — tell us your soldering sequence and we will quote a matching configuration.
Product OverviewApplication FieldsTransformer Lead Dipping
Batch Matrix Soldering
Repeatable Pin Finishing
Continuous Workshop Production
FeaturesIntegrated Pick-and-Clamp Head
Matrix Tray Loading
Floor-Standing Vertical Build
Built to Order
AdvantagesNo Hand Dipping Over the Pot
Consistent Dips Batch After Batch
Compact 800 × 1050 mm Footprint
Factory Direct from Dongguan, China
Automatic Dip Soldering / Tin Dipping Machine RangeEvery machine is built to order in Dongguan, Guangdong, China. Send us your product, pin layout and output per shift for a machine recommendation and quotation.
Product Details
987ZL-360 overall view

Working area

Function diagram
Photographs are of the standard model. Tray layouts are adapted to your transformer dimensions.
Product Demo Video
Contact us for a live working video or online demonstration.
Application ScenariosTransformer Production Transformers are dip-soldered tray by tray with the pick-and-clamp head, so a full matrix batch is finished without an operator standing over the solder pot. Repeatable Dips The machine dips every part at the same controlled angle and depth, giving the same pin finish on the first transformer and the hundredth. Compact Footprint The vertical build stands on an 800 × 1050 mm floor area, so the machine fits into an existing transformer line without a large layout change. Same Platform, Other Products The 987 platform is also supplied as a filter version with dual high / low temperature pots (987XL) and as the FD980 / FD987 series for toroidal inductors — ask us which type fits your product. How To UseLoad the matrix tray with transformers — the integrated pick-and-clamp head takes each part from its tray position automatically.
Start the cycle — the head clamps the part and dips the leads into the molten solder at the set angle and depth.
Lift and release — after the dip the head returns the soldered transformer to the tray position.
Inspect and pack — unload the tray, check the pin finish and pack; consistent dips mean less rework.
Keep the pot topped up and skimmed so the solder surface stays clean for the next batch.
⚠ Safety notice: molten solder operates at high temperature — never reach into the pot area while the machine runs, keep the work area dry, use heat-resistant gloves during pot maintenance, and isolate the power supply before any service.Frequently Asked QuestionsQ1: What is the 987ZL-360?
The 987ZL-360 is a floor-standing vertical automatic dip soldering machine dedicated to transformers. It loads parts in matrix trays with an integrated pick-and-clamp head and dips the leads automatically, so no part is held over the solder pot by hand. It is built to order by FD in Dongguan, Guangdong, China. In the transformer trade the same machine is usually called an automatic tin dipping machine or a dip tin machine; in general electronics it is an automatic dip soldering machine.
Q2: How automatic is it — do I still need to hold the parts?
No. Loading and unloading run through the integrated pick-and-clamp head with matrix trays, and the dipping sequence is automatic, so the operator only loads and unloads trays.
Q3: How much floor space does it need?
The machine stands 800 mm wide, 1050 mm long and 1550 mm high and weighs 300 kg. It is shipped in a 1650 × 1200 × 1000 mm wooden case with a settlement shipping weight of 400 kg.
Q4: How is it different from hand dipping in a solder pot?
Hand dipping depends on the operator for angle, depth and timing, and it puts hands near molten solder. This machine dips every transformer at the same controlled angle and depth automatically, giving a repeatable pin finish and removing the operator from the hot zone.
Q5: Can it be adapted to my transformer size?
Yes. The machine is built to order in Dongguan, Guangdong, China; tray layouts and pot configurations are adapted to your transformer dimensions. Send us your drawing, pin layout and output per shift and we will propose the configuration and quotation.
Q6: Which industries use an automatic dip soldering machine like this?
This model is dedicated to transformers. The same 987 platform is also supplied for filters (987XL with dual high / low temperature pots) and for toroidal inductors and transformers (FD980 / FD987 series) — wherever leaded components must be dip-soldered in batches with repeatable results.
Need automatic dip soldering for your transformers?OEM / ODM available · Integrated pick-and-clamp · Matrix loading · Compact vertical build · Factory direct from Dongguan, China · Layout drawing on requestGet a Quote
相關產品
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
產品詢價
請留言,我們收到後會迅速與您聯繫,感謝您的支持!
常見問題
問
香菸盒三維包裝機特點?
答
1. 更換模具時無需調節機器兩側工作臺面高度,無需拆裝出料鏈條、放料斗,將傳統機四小時的更換模具時間縮短爲只需現在30分鐘。
2. 採用新式雙保險機構,機器運行不同步時無需停機也不會損壞其它零部件。
3. 獨創的單向手搖裝置防止逆向搖動機器,且運行時手輪不會轉動使操作人員更安全。
4. 新型雙旋轉切膜刀可保證機器連續使用多年無需磨刀口,克服了傳統固定式單旋轉切膜刀刃容易磨損的缺陷。
問
全自動撲克透明膜三維包裝機包裝產品?
答
全自動撲克透明膜三維包裝機主要適用於散裝撲克、壓縮餅乾,沙琪瑪、報事貼、便箋紙、威化餅乾等散狀或多件物體集合的三維包裝。
English
繁体中文
简体中文
Deutsch
Tiếng Việt