產品
Touch-Screen Multi-Stage Industrial Oven
- 產品詳情
-
STANDARD SERIES · TOUCH-SCREEN MULTI-STAGE INDUSTRIAL OVEN (PROGRAMMABLE CABINET)
The Touch-Screen Multi-Stage Industrial Oven is our programmable cabinet oven for staged thermal processes: heating, soaking and holding segments are set on the touch-screen panel and the oven follows them automatically. The photographs on this page are workshop shots of the actual build — a steel cabinet with a front-opening door and a top-mounted control box. Chamber size, power and voltage are matched to your process when you enquire. Also listed as a touch-screen industrial oven, a programmable drying oven or an industrial drying oven.
Product ParametersModel Touch-Screen Multi-Stage Industrial Oven (model number confirmed with the quotation) Also Known As Touch-Screen Industrial Oven · Programmable Drying Oven · Industrial Drying Oven Control Touch-screen intelligent controller with multi-stage programming, timer and alarm functions Construction Steel cabinet, front-opening door, top-mounted control box (as shown in the photographs) Chamber / power / voltage Set against your process — confirmed with the quotation The listing carries no parameter table, so no figures are quoted here — tell us the chamber size and temperature range you need and we confirm the full datasheet with the quotation.
Function SetMulti-stage programming on a touch screen — heating, soak and holding stages are programmed on the panel; no more watching the clock and turning knobs between steps.
Intelligent controller with alarms — the touch panel combines the timer, the working display and the alarm functions in one place, as shown in the photographs.
Hot-air circulation cabinet — forced circulation evens the temperature across the shelves, the same principle as the rest of the standard series.
Front-opening single door — full-height door for tray loading, with the control box on top of the cabinet within easy reach.
Workshop-proven build — every photograph on this page is a shot of the real unit in the workshop, not a render.
Sized to your process — chamber dimensions, power and voltage are specified per order, so the oven matches the line it joins.
Product OverviewApplication Fields Features Advantages Staged drying, curing and ageing processes in electronics, coating and printing shops that want programmable control at cabinet-oven cost. Touch-screen multi-stage controller, steel cabinet with top control box, front-opening door, workshop-photographed build. Programmable repeatability, factory-direct pricing, and a chamber sized exactly to your process at order time. Standard Oven RangeFloor-standing explosion-proof models with trolley loading are listed separately — ask for the explosion-proof series with your enquiry.
Product Details
Overall view, workshop shot

Touch controller with button panel

Full-height door opened for loading

Intelligent controller, live display

Top-mounted control box

Installed in the workshop
All photographs are workshop shots of the actual unit.
Application ScenariosStaged curing Coatings and adhesives with multi-step cure windows — each stage runs itself, and the operator only loads and unloads. Batch drying General moisture drying with a timer and alarm, so the batch can finish unattended at the end of a shift. Preheating Warming parts before assembly or potting, with the touch screen holding the preheat point steady. How To UsePlace the oven on a level floor with ventilation clearance and connect it to the supply confirmed in your order.
Load the chamber evenly and close the door fully.
Programme the stages on the touch screen: heating step, soak temperature and hold time.
Start the run; the controller drives each stage and sounds the alarm at the end of the programme.
Save the validated programme and recall it for repeat batches.
After the shift, switch off, vent the chamber, and clean the interior once it has cooled.
Safety note: the housing surface stays hot after a run. Use heat-resistant gloves when unloading, keep the air inlet and outlet clear, and do not process flammable solvents in the standard series.
FAQQ1: Which chamber sizes are available?
A: The listing is built to order, so the chamber is sized to your process — tell us the largest part and the tray count and we confirm the dimensions with the quotation.
Q2: What can the touch screen do?
A: It combines multi-stage programming, the working display, the timer and the alarm functions in one panel, as shown in the photographs.
Q3: Is this the same as the FD1000600500C?
A: They are close relatives — both are touch-screen multi-stage cabinet ovens. The FD1000600500C is the fixed 900 L platform; this model is specified per order. If you want the documented 900 L platform, order that model.
Q4: Can I get a datasheet before ordering?
A: Yes — the listing does not carry a parameter table, so we send the datasheet for your configuration together with the quotation.
Q5: Does it run on 220 V or 380 V?
A: Either — the supply is matched to your workshop when the configuration is confirmed.
Q6: Is it suitable for flammable solvents?
A: No — for solvent-bearing processes use the floor-standing explosion-proof series with a pressure-relief rear door.
Need a quotation for the Touch-Screen Multi-Stage Industrial Oven?
Tell us your process stages and part size — we size the chamber and confirm the datasheet with the quotation.
Get a Quote
相關產品
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
產品詢價
請留言,我們收到後會迅速與您聯繫,感謝您的支持!
常見問題
問
香菸盒三維包裝機特點?
答
1. 更換模具時無需調節機器兩側工作臺面高度,無需拆裝出料鏈條、放料斗,將傳統機四小時的更換模具時間縮短爲只需現在30分鐘。
2. 採用新式雙保險機構,機器運行不同步時無需停機也不會損壞其它零部件。
3. 獨創的單向手搖裝置防止逆向搖動機器,且運行時手輪不會轉動使操作人員更安全。
4. 新型雙旋轉切膜刀可保證機器連續使用多年無需磨刀口,克服了傳統固定式單旋轉切膜刀刃容易磨損的缺陷。
問
全自動撲克透明膜三維包裝機包裝產品?
答
全自動撲克透明膜三維包裝機主要適用於散裝撲克、壓縮餅乾,沙琪瑪、報事貼、便箋紙、威化餅乾等散狀或多件物體集合的三維包裝。
English
繁体中文
简体中文
Deutsch
Tiếng Việt

