產品
CNC Automatic Dip Soldering Machine — FD886 Solder Cup Type
- 產品詳情
-
AUTOMATIC SERIES · CNC-CONTROLLED AUTOMATIC DIP SOLDERING MACHINE (FD886 · SOLDER CUP TYPE)
The FD886 is a CNC-Controlled Automatic Dip Soldering Machine configured with a solder cup, a translation stage and a solder scraper. It is supplied for parts that are held upright in the fixture, where the solder is brought to the pin group rather than the whole part being lowered flat into a pot. Like the rest of the FD dip-soldering range it runs a stored program, so the same motion is repeated for every part in the batch. Built to order by FD in Dongguan, Guangdong, China. In the trade the same machine is also called an automatic tin dipping machine, a CNC-Controlled Automatic Dip Soldering Machine or a lead tinning machine — "CNC" only describes the controller that runs the stored dip program; all these names refer to the same machine.
Product ParametersModel FD-886 Also Known As CNC-Controlled Automatic Dip Soldering Machine · Automatic Tin Dipping Machine · Automatic Tinning Machine Functions Solder cup · translation · solder scraper Solder Cup Cup-type solder station for upright parts in the fixture Translation Fixture travels to the soldering station on a translation axis Solder Scraper Solder-surface scraper on the soldering station Specifications are as listed in our catalogue. Cup size, fixture and dip sequence are made to your part — send us a sample part for a proposal.
Function SetSolder cup station — a cup-type solder station that works on the pin group of a part held upright in the fixture
Translation stage — parts travel to the cup on a translation axis, so the operator only loads and unloads
Solder scraper — the solder surface is scrapped clean before the pin group enters it
Stored soldering program — the sequence is repeated by the controller for every part, so the result does not depend on the operator
Built to your fixture — the holder is made to your part drawing so upright parts sit square to the solder station
These are the standard functions of the FD886 platform as supplied. Cup size and fixture are made to your part — tell us your soldering sequence and we will quote a matching configuration.
Product OverviewApplication FieldsUpright Part Dipping
Pin Group Soldering
Batch Dip Soldering
Repeatable Pin Finishing
FeaturesCup-Type Solder Station
Translation Stage
Solder Scraper
Fixture Made To Your Drawing
AdvantagesSolder Brought To The Pins
No Manual Holding
Same Program Every Part
Factory Direct from Dongguan, China
CNC-Controlled Automatic Dip Soldering Machine RangeThe CNC-Controlled Automatic Dip Soldering Machine range covers rotary, auto-scraper, solder-cup and left-lift models. Every machine is built to order in Dongguan, Guangdong, China — send us your part, pin layout and output per shift for a machine recommendation and quotation.
Product Details
FD886 overall view

Working area

Solder cup detail
Photographs are of the standard model. Fixtures are adapted to your part.
Product Demo Video
▶ Watch the working video →
Application ScenariosParts That Sit Upright in the Fixture Where the part is held upright, the solder cup works on the pin group directly instead of the whole part being turned over the pot. Pin Groups on One Face The cup is set to the pin group, so only the leads that need solder are touched and the body of the part stays clean. Batch Work on a Translation Stage Parts travel to the soldering station automatically; the operator loads and unloads fixtures rather than holding parts over molten solder. Same Result Every Part The soldering sequence is stored in the controller, so part one and the last part of the shift come out the same. How To UseLoad the fixture with your parts in the upright position the holder was made for.
Let the scraper clean the cup the solder surface is scrapped before the pin group enters it.
Move to the solder cup the translation stage brings the fixture to the cup, which works on the pin group.
Return and unload the fixture travels back to the loading position for unloading.
Check the cup between shifts keep the solder topped up and clean so the surface stays in good condition.
⚠ Safety notice: molten solder operates at high temperature — never reach into the pot area while the machine runs, keep the work area dry (molten solder and water contact can cause splatter), use heat-resistant gloves during pot maintenance, and isolate the power supply before any service.Frequently Asked QuestionsQ1: What is a CNC-Controlled Automatic Dip Soldering Machine?
It is a machine that dips component pins into molten solder automatically instead of by hand, with the motion controlled by a stored program. The FD886 is supplied with a solder cup, a translation stage and a solder scraper. The same machine is also called an automatic tin dipping machine, a CNC-Controlled Automatic Dip Soldering Machine or a lead tinning machine — "CNC" only describes the controller that runs the stored dip program; all these names refer to the same machine.
Q2: What is the solder cup for?
The cup is a cup-type solder station. It lets the solder be brought to the pin group of a part that is held upright in the fixture, instead of the whole part being lowered flat into a bath.
Q3: How does the machine move the parts?
The fixture travels to the soldering station on a translation axis, then returns to the loading position. The operator loads and unloads fixtures and does not hold parts over molten solder.
Q4: Can the cup and fixture be made for my part?
Yes. The machine is built to order in Dongguan, Guangdong, China, and the holder and cup setting are made to your part drawing. Send us a sample part and your output per shift for a configuration and quotation.
Q5: Is a working video available?
Yes — use the demonstration video link on this page, or ask us to send the current video for your part type.
Q6: Which industries use this type of machine?
Makers of transformers, inductors and leaded components whose parts are held upright for soldering, and any workshop that needs the same dip result across a batch.
Need to solder upright parts in batches?OEM / ODM available · Solder cup station · Translation stage · Solder scraper · Fixture made to your drawing · Factory direct from Dongguan, ChinaGet a Quote
相關產品
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
產品詢價
請留言,我們收到後會迅速與您聯繫,感謝您的支持!
常見問題
問
香菸盒三維包裝機特點?
答
1. 更換模具時無需調節機器兩側工作臺面高度,無需拆裝出料鏈條、放料斗,將傳統機四小時的更換模具時間縮短爲只需現在30分鐘。
2. 採用新式雙保險機構,機器運行不同步時無需停機也不會損壞其它零部件。
3. 獨創的單向手搖裝置防止逆向搖動機器,且運行時手輪不會轉動使操作人員更安全。
4. 新型雙旋轉切膜刀可保證機器連續使用多年無需磨刀口,克服了傳統固定式單旋轉切膜刀刃容易磨損的缺陷。
問
全自動撲克透明膜三維包裝機包裝產品?
答
全自動撲克透明膜三維包裝機主要適用於散裝撲克、壓縮餅乾,沙琪瑪、報事貼、便箋紙、威化餅乾等散狀或多件物體集合的三維包裝。
English
繁体中文
简体中文
Deutsch
Tiếng Việt

