Sản phẩm
Three-Tank Automatic Ultrasonic Cleaning Line with PLC
- Product details
-
STANDARD SERIES · MULTI-TANK ULTRASONIC CLEANER
Multi-tank ultrasonic cleaning lines with PLC control and automatic water fill / drain. Three tanks run independently, so each tank can be set to its own process step — typically ultrasonic wash, ultrasonic rinse and hot rinse (or hot-air dry). The automatic water-change sequence removes the manual filling and draining that limits a standard cleaning line, which makes this machine suitable for continuous workshop production.
Product ParametersProduct Type Three-tank automatic ultrasonic cleaner with PLC control Model FD-400330300TK Tank Quantity 3 tanks, independently controlled Tank Size (each) 400 L × 330 W × 300 D mm Transducers 15 pcs × 3 tanks Ultrasonic Power 900 W × 3 tanks Heating Power 1800 W × 3 tanks Overall Dimensions 1580 L × 580 W × 800 H mm Controller PLC with touch screen Operating Mode 3 tanks run independently · automatic water fill and drain Cleaning Method Ultrasonic cavitation + heated solution, multi-stage Power Supply 380 V three-phase (confirm at order for your plant) Place of Origin Dongguan, Guangdong, China Selling Unit 1 set / unit Specifications are for reference. Tank size, tank quantity, transducer count, power and automation level can be customized — contact us for the full datasheet.
Automation & PLC ControlThe PLC runs the whole cleaning line: it fills each tank to level, heats to the set temperature, runs the ultrasonic cycle, drains, and repeats — while monitoring water level and temperature and signalling the machine state on the panel lamps.
Digital Inputs (X) Start / stop push-button (momentary) · high water level switch · low water level switch · three temperature sensors (one per tank) Digital Outputs (Y) Water inlet valve · drain valve · drain pump motor · ultrasonic generator · heater 1 / 2 / 3 · three-colour indicator lamp · buzzer alarm Status Lamps Green — running (ultrasonic active) · Yellow — standby / temperature or water level not yet reached · Red — stop, alarm, low water level or emergency stop Protection Low-level cut-off prevents dry running · high-level switch stops the inlet valve · temperature monitoring per tank · start blocked until fill and temperature conditions are satisfied Barrier / Interlock Water inlet and drain are interlocked with the level switches, so the sequence cannot run a tank dry. Cycle logic can be adapted to suit your process step order. The control logic is programmable. If your process needs a different tank sequence, extra baskets or a lifting mechanism, tell us and we will quote a matching configuration.
Typical Three-Tank Process SequenceStage Tank Function 1 Wash tank Hot ultrasonic cleaning solution — removes grease, cutting oil and loose rust from the parts. 2 Ultrasonic rinse tank Second ultrasonic cycle in cleaner water, lifting off residue carried over from the wash tank. 3 Hot rinse tank Clean hot-water rinse; the heat helps the parts dry quickly after removal and reduces flash rust. Tank roles are configurable — with three independently controlled tanks you can also run two wash stages plus one rinse, or add a drying stage.
Accessories & Spare PartsCleaning basket × 1 per tank — lifts parts in and out without touching the tank floor
Lid / cover for each tank — keeps heat in and reduces evaporation
Water inlet valve and drain valve — solenoid operated, PLC controlled
Drain pump motor — automatic emptying of the tanks
Level switches — high and low water level sensors per tank
Temperature sensors — one per tank, connected to the PLC
Ultrasonic transducers and stainless steel immersion heaters — replaceable
Touch-screen PLC panel, power cable and operation manual
Spare baskets, valves, level switches and transducers are available separately. We keep the electrical drawing for each machine so spare parts can be matched years later.
User ManualOperating instructions, PLC parameter guidance, cleaning-solution guidance and maintenance manual
USER MANUAL PDFEnglish manual available. Chinese manual, PLC program listing and electrical drawing available on request.
Product Demo Video
Contact us for a live working video or online demonstration.
Product OverviewApplication FieldsContinuous Workshop Cleaning Lines
Hardware & Machined Parts
Engine & Automotive Components
Mould & Die Cleaning
Features3 Independently Controlled Tanks
Automatic Water Fill & Drain
15 Transducers & 900 W per Tank
PLC with Touch Screen
AdvantagesNo Manual Filling Between Batches
Level & Temperature Interlocks
Reproducible Cleaning Result
Factory Direct Price
Product Type · Multi-Tank ModelsMulti-tank lines are built to order. Send us the parts you clean, the throughput per shift and the floor space available, and we will propose a tank layout and a quotation.
Multi-Tank Model ComparisonModel Tanks Transducers Ultrasonic Power Heating Power Control Tank Size (each) FD-400330300TK 3 15 pcs × 3 900 W × 3 1800 W × 3 PLC + touch screen, automatic water change 400 × 330 × 300 mm Multi-tank (custom) 3 / 4 / 5 On request On request On request PLC, level configurable Made to order Compared with a single-tank machine, the three-tank line roughly triples the ultrasonic power and adds automatic water management — the operator loads parts and the PLC handles the rest of the cycle.
Product Details
FD-400330300TK overall view

Three-tank layout

Touch-screen PLC panel

Automatic inlet & drain
Photographs are of standard models. Multi-tank lines are built to order and may differ in layout. Send us your parts for a layout drawing.
Application ScenariosMass Production Cleaning Continuous workshop lines where the operator loads a basket and the PLC runs wash, rinse and hot rinse in sequence, giving a repeatable result from batch to batch. Heavy Rust & Grease Components that need a long cleaning cycle followed by two rinse stages, cleaned without any manual tank filling between batches. Engine & Auto Parts Cylinder heads, carburettor bodies, gearbox parts and other components with complex internal passages, where a single tank leaves residue and a three-tank line does not. Mould & Die Cleaning Removal of release agent, burnt-on plastic and carbon deposits from injection moulds with a heated wash and two clean rinses. How To UseFill each tank to the working level and confirm the level switches read correctly. The PLC blocks the start sequence until the fill and temperature conditions are satisfied — never bypass the low-level cut-off.
Set the temperature for each tank on the touch screen (typically 40–60 °C for degreasing; the rinse tanks can run cooler or hot for faster drying).
Load the parts into the basket and lower it into the first tank. Do not let parts rest directly on the tank bottom — this blocks the ultrasonic wave.
Set the cycle time for each stage and press start. The green lamp lights while the ultrasonic cycle is running.
Transfer the basket to the next tank at the end of each stage. The tanks run independently, so a second basket can be started in tank 1 while the first is rinsing.
Drain and refill via the automatic water change sequence rather than by hand, then lift the parts out, inspect and dry. Apply a protective oil promptly to rust-sensitive parts.
Clean the tanks and check the level switches, valves and drain pump regularly. Change the wash solution before it becomes saturated — contaminated solution reduces cleaning efficiency and contaminates the following rinse stages.
⚠ Safety notice: never operate the ultrasonic cleaner without liquid in a tank, keep hands out of the tanks while the ultrasonic power is on, do not defeat the high or low level switches, use only cleaning agents compatible with stainless steel, and isolate the power supply before maintenance, valve service or draining.Need an automatic multi-tank cleaning line?OEM / ODM available · 3 / 4 / 5 tanks · PLC control with automatic water change · Factory direct from Dongguan, China · Layout drawing on request · Sample testing supportedGet a Quote
related products
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
Yêu cầu sản phẩm
Vui lòng để lại tin nhắn của bạn, chúng tôi sẽ liên hệ với bạn nhanh chóng sau khi nhận được nó, cảm ơn bạn đã hỗ trợ của bạn!
common problem
Q
What are the characteristics of cigarette box three-dimensional packaging machine?
A
1. There is no need to adjust the height of the countertops on both sides of the machine when changing the mold, and there is no need to disassemble and assemble the discharge chain or put the hopper, which shortens the four-hour mold replacement time of the traditional machine to only 30 minutes.
2. Adopting a new dual insurance mechanism, the machine does not need to be shut down when it is not running synchronously, nor will it damage other parts.
3. The original one-way hand crank device prevents the machine from shaking in reverse, and the handwheel does not rotate during operation, making the operator safer.
4. The new double rotary film cutting knife can ensure that the machine can be used continuously for many years without a sharpening port, overcoming the defect that the traditional fixed single rotary film cutting blade is easy to wear.
Q
Automatic poker transparent film three-dimensional packaging machine packaging products?
A
Automatic poker transparent film three-dimensional packaging machine is mainly suitable for bulk poker, compressed biscuits, sachima, stickers, sticky notes, wafer biscuits and other bulk or multi-object collection of three-dimensional packaging.
Địa chỉ email:
Đường dây nóng:
English
繁体中文
简体中文
Deutsch
Tiếng Việt