+

Multi-Tank

3-tank automatic ultrasonic cleaner with PLC touch screen, auto water fill & drain. 15 transducers & 900 W per tank, 1800 W heating. Dongguan factory direct.

Category:

  • Product details
  • AUTOMATIC SERIES · MULTI-TANK AUTOMATIC ULTRASONIC CLEANER

    Fully automatic multi-tank ultrasonic cleaning machine with PLC touch-screen control. Three tanks run independently — typically ultrasonic wash, ultrasonic rinse and hot rinse — and the PLC handles water filling, heating, cycle timing and draining automatically, so the operator only loads and unloads baskets. This is the only automatic cleaner in our range; the other series pages cover manually operated machines.

    Product Parameters
    Product TypeThree-tank fully automatic ultrasonic cleaner with PLC
    ModelFD-400330300TK
    Tank Quantity3 tanks, independently controlled
    Tank Size (each)400 L × 330 W × 300 D mm
    Transducers15 pcs × 3 tanks
    Ultrasonic Power900 W × 3 tanks
    Heating Power1800 W × 3 tanks
    Overall Dimensions1580 L × 580 W × 800 H mm
    ControllerPLC with touch screen
    Operating Mode3 tanks run independently · automatic water fill and drain
    Cleaning MethodUltrasonic cavitation + heated solution, multi-stage
    Power Supply380 V three-phase (confirm at order for your plant)
    Place of OriginDongguan, Guangdong, China
    Selling Unit1 set / unit

    Specifications are for reference. Tank size, tank quantity, transducer count, power and automation level can be customized — contact us for the full datasheet.

    Automation & PLC Control

    The PLC runs the whole machine: it fills each tank to level, heats to the set temperature, runs the ultrasonic cycle, drains, and repeats — while monitoring water level and temperature and signalling the machine state on the panel lamps.

    Digital Inputs (X)Start / stop push-button (momentary) · high water level switch · low water level switch · three temperature sensors (one per tank)
    Digital Outputs (Y)Water inlet valve · drain valve · drain pump motor · ultrasonic generator · heater 1 / 2 / 3 · three-colour indicator lamp · buzzer alarm
    Status LampsGreen — running (ultrasonic active) · Yellow — standby / temperature or water level not yet reached · Red — stop, alarm, low water level or emergency stop
    ProtectionLow-level cut-off prevents dry running · high-level switch stops the inlet valve · temperature monitoring per tank · start blocked until fill and temperature conditions are satisfied
    Barrier / InterlockWater inlet and drain are interlocked with the level switches, so the sequence cannot run a tank dry. Cycle logic can be adapted to suit your process step order.

    The control logic is programmable. If your process needs a different tank sequence, extra baskets or a lifting mechanism, tell us and we will quote a matching configuration.

    Typical Three-Tank Process Sequence
    StageTankFunction
    1Wash tankHot ultrasonic cleaning solution — removes grease, cutting oil and loose rust from the parts.
    2Ultrasonic rinse tankSecond ultrasonic cycle in cleaner water, lifting off residue carried over from the wash tank.
    3Hot rinse tankClean hot-water rinse; the heat helps the parts dry quickly after removal and reduces flash rust.

    Tank roles are configurable — with three independently controlled tanks you can also run two wash stages plus one rinse, or add a drying stage.

    Accessories & Spare Parts
    • Cleaning basket × 1 per tank — lifts parts in and out without touching the tank floor

    • Lid / cover for each tank — keeps heat in and reduces evaporation

    • Water inlet valve and drain valve — solenoid operated, PLC controlled

    • Drain pump motor — automatic emptying of the tanks

    • Level switches — high and low water level sensors per tank

    • Temperature sensors — one per tank, connected to the PLC

    • Ultrasonic transducers and stainless steel immersion heaters — replaceable

    • Touch-screen PLC panel, power cable and operation manual

    Spare baskets, valves, level switches and transducers are available separately. We keep the electrical drawing for each machine so spare parts can be matched years later.

    User Manual

    Operating instructions, PLC parameter guidance, cleaning-solution guidance and maintenance manual

       USER MANUAL PDF

    English manual available. Chinese manual, PLC program listing and electrical drawing available on request.

    Product Demo Video
    Multi-Tank(Image1)    

    Contact us for a live working video or online demonstration.

    Product Overview
    Application Fields
    • Continuous Workshop Cleaning Lines

    • Hardware & Machined Parts

    • Engine & Automotive Components

    • Mould & Die Cleaning

    Features
    • 3 Independently Controlled Tanks

    • Automatic Water Fill & Drain

    • 15 Transducers & 900 W per Tank

    • PLC with Touch Screen

    Advantages
    • No Manual Filling Between Batches

    • Level & Temperature Interlocks

    • Reproducible Cleaning Result

    • Factory Direct Price

    Product Type · Automatic Series
    Multi-Tank(Image2)

    Three-Tank Automatic FD-400330300TK

    3 tanks · PLC + touch screen · auto water fill / drain

    15×3 transducers · 900 W×3 · 1800 W×3 heating

    View Details →

    Multi-Tank(Image3)

    Cleaning + Hot-Air Drying Line

    TK cleaner paired with dedicated drying stations

    Wash → rinse → dry in one connected flow

    View Details →

    Multi-Tank(Image4)

    Multi-Tank Line · Custom Build

    3 / 4 / 5 tanks to suit your process

    Tank size, sequence and automation made to order

    View Details →

    Need manually operated machines instead? See our standard series: single-tank, double-tank and commercial models.

    Automatic vs Standard Series
    ItemAutomatic FD-400330300TKStandard FD-400330300
    Tanks3, independently controlled1 (double-tank and commercial models available)
    Ultrasonic Power900 W × 3 (15 transducers each)600 W (12 transducers) or 2340 W reinforced
    Water HandlingAutomatic fill and drain via PLC valves and pumpManual drain valve
    ControlPLC touch screen, level and temperature interlocks, signal lampsTimer and heating thermostat
    Best ForContinuous production, repeatable results, less operator timeWorkshop and maintenance cleaning at entry cost

    Compared with a single-tank standard machine, the automatic line roughly triples the ultrasonic power and removes manual water handling from every batch.

    Product Details
    Multi-Tank(Image5)

    FD-400330300TK overall view

    Multi-Tank(Image6)

    Three-tank layout

    Multi-Tank(Image7)

    Touch-screen PLC panel

    Multi-Tank(Image8)

    Automatic inlet & drain

    Photographs are of the standard model. Custom tank quantities may differ in layout. Send us your parts for a layout drawing.

    Application Scenarios
    Mass Production CleaningContinuous workshop lines where the operator loads a basket and the PLC runs wash, rinse and hot rinse in sequence, giving a repeatable result from batch to batch.
    Heavy Rust & GreaseComponents that need a long cleaning cycle followed by two rinse stages, cleaned without any manual tank filling between batches.
    Engine & Auto PartsCylinder heads, carburettor bodies, gearbox parts and other components with complex internal passages, where a single tank leaves residue and a three-tank line does not.
    Mould & Die CleaningRemoval of release agent, burnt-on plastic and carbon deposits from injection moulds with a heated wash and two clean rinses.
    How To Use
    1. Fill each tank to the working level and confirm the level switches read correctly. The PLC blocks the start sequence until the fill and temperature conditions are satisfied — never bypass the low-level cut-off.

    2. Set the temperature for each tank on the touch screen (typically 40–60 °C for degreasing; the rinse tanks can run cooler or hot for faster drying).

    3. Load the parts into the basket and lower it into the first tank. Do not let parts rest directly on the tank bottom — this blocks the ultrasonic wave.

    4. Set the cycle time for each stage and press start. The green lamp lights while the ultrasonic cycle is running.

    5. Transfer the basket to the next tank at the end of each stage. The tanks run independently, so a second basket can be started in tank 1 while the first is rinsing.

    6. Drain and refill via the automatic water change sequence rather than by hand, then lift the parts out, inspect and dry. Apply a protective oil promptly to rust-sensitive parts.

    7. Clean the tanks and check the level switches, valves and drain pump regularly. Change the wash solution before it becomes saturated — contaminated solution reduces cleaning efficiency and contaminates the following rinse stages.

    ⚠ Safety notice: never operate the ultrasonic cleaner without liquid in a tank, keep hands out of the tanks while the ultrasonic power is on, do not defeat the high or low level switches, use only cleaning agents compatible with stainless steel, and isolate the power supply before maintenance, valve service or draining.
    Frequently Asked Questions

    Q1: What is an automatic multi-tank ultrasonic cleaner?

    It is a machine with three independently controlled tanks (ultrasonic wash, ultrasonic rinse, hot rinse) in which a PLC handles water filling, heating, cycle timing and draining automatically. On model FD-400330300TK each tank has 15 transducers, 900 W ultrasonic power and 1800 W heating; the operator only moves the basket between tanks.

    Q2: How automatic is it — do I still need to drain tanks by hand?

    No. Water fill and drain run through PLC-controlled solenoid valves and a drain pump, monitored by high and low level switches in every tank, so the sequence cannot run a tank dry or overflow it.

    Q3: Can the tank sequence be customized?

    Yes. Tank roles, cycle times and temperatures are programmable, and the machine is built to order in Dongguan, Guangdong, China — 4-tank and 5-tank configurations are available on request.

    Q4: How is the automatic model different from a standard ultrasonic cleaner?

    A standard machine has one tank, a manual drain valve and a timer / thermostat control. The automatic FD-400330300TK has three independently controlled tanks with 900 W ultrasonic power each (15 transducers per tank), PLC-controlled automatic water fill and drain, level and temperature interlocks, and status lamps — so the ultrasonic power is roughly tripled and the manual water handling is removed from every batch.

    Q5: Can it be extended into a cleaning and drying line?

    Yes. The same factory can supply the automatic cleaner as one line with a hot-air drying station — a vertical forced-air drying oven or a five-stage circulating oven — plus an optional flat preheat box FD33027020Y (1000 W) for trays and small parts. Parts leave the hot rinse tank already warm and go straight into drying, so the whole clean-to-dry process is matched, installed and warranted as one system.

    Q6: Which industries use an automatic multi-tank ultrasonic cleaner?

    It is used wherever parts are cleaned in batches and the result must be repeatable from one batch to the next: inductor and transformer pins, connectors and terminals, hardware and machined parts, stamping and die-casting components, automotive parts, and moulds and dies. Tell us your part, output per shift and cleanliness requirement and we will recommend the tank configuration, temperatures and cycle times.

     
    Need a fully automatic cleaning line?
    OEM / ODM available · 3 / 4 / 5 tanks · PLC control with automatic water change · Cleaning + drying line configurations · Factory direct from Dongguan, China · Layout drawing on request
    Get a Quote

Previous:

Next:

Yêu cầu sản phẩm

Vui lòng để lại tin nhắn của bạn, chúng tôi sẽ liên hệ với bạn nhanh chóng sau khi nhận được nó, cảm ơn bạn đã hỗ trợ của bạn!

Multi-Tank
  • What kind of product do you need?
  • What's your budget?
  • What other information do you need to know?

common problem

Q

What are the characteristics of cigarette box three-dimensional packaging machine?


A

Main features:
1. There is no need to adjust the height of the countertops on both sides of the machine when changing the mold, and there is no need to disassemble and assemble the discharge chain or put the hopper, which shortens the four-hour mold replacement time of the traditional machine to only 30 minutes.
2. Adopting a new dual insurance mechanism, the machine does not need to be shut down when it is not running synchronously, nor will it damage other parts.
3. The original one-way hand crank device prevents the machine from shaking in reverse, and the handwheel does not rotate during operation, making the operator safer.
4. The new double rotary film cutting knife can ensure that the machine can be used continuously for many years without a sharpening port, overcoming the defect that the traditional fixed single rotary film cutting blade is easy to wear.

Q

Automatic poker transparent film three-dimensional packaging machine packaging products?


A

Automatic poker transparent film three-dimensional packaging machine packaging products
Automatic poker transparent film three-dimensional packaging machine is mainly suitable for bulk poker, compressed biscuits, sachima, stickers, sticky notes, wafer biscuits and other bulk or multi-object collection of three-dimensional packaging.

If you want to know more about the details of a certain company, please visit our official website where there is comprehensive and in-depth information for you to check!


Bản quyền © 2026

Để lại tin nhắn của bạn

Nếu bạn có bất kỳ đề xuất hoặc câu hỏi cho chúng tôi, xin vui lòng liên hệ với chúng tôi!

We use cookie to improve your online experience. By continuing to browse this website, you agree to our use of cookie.

Cookies

Please read our Terms and Conditions and this Policy before accessing or using our Services. If you cannot agree with this Policy or the Terms and Conditions, please do not access or use our Services. If you are located in a jurisdiction outside the European Economic Area, by using our Services, you accept the Terms and Conditions and accept our privacy practices described in this Policy.
We may modify this Policy at any time, without prior notice, and changes may apply to any Personal Information we already hold about you, as well as any new Personal Information collected after the Policy is modified. If we make changes, we will notify you by revising the date at the top of this Policy. We will provide you with advanced notice if we make any material changes to how we collect, use or disclose your Personal Information that impact your rights under this Policy. If you are located in a jurisdiction other than the European Economic Area, the United Kingdom or Switzerland (collectively “European Countries”), your continued access or use of our Services after receiving the notice of changes, constitutes your acknowledgement that you accept the updated Policy. In addition, we may provide you with real time disclosures or additional information about the Personal Information handling practices of specific parts of our Services. Such notices may supplement this Policy or provide you with additional choices about how we process your Personal Information.


Cookies

Cookies are small text files stored on your device when you access most Websites on the internet or open certain emails. Among other things, Cookies allow a Website to recognize your device and remember if you've been to the Website before. Examples of information collected by Cookies include your browser type and the address of the Website from which you arrived at our Website as well as IP address and clickstream behavior (that is the pages you view and the links you click).We use the term cookie to refer to Cookies and technologies that perform a similar function to Cookies (e.g., tags, pixels, web beacons, etc.). Cookies can be read by the originating Website on each subsequent visit and by any other Website that recognizes the cookie. The Website uses Cookies in order to make the Website easier to use, to support a better user experience, including the provision of information and functionality to you, as well as to provide us with information about how the Website is used so that we can make sure it is as up to date, relevant, and error free as we can. Cookies on the Website We use Cookies to personalize your experience when you visit the Site, uniquely identify your computer for security purposes, and enable us and our third-party service providers to serve ads on our behalf across the internet.

We classify Cookies in the following categories:
 ●  Strictly Necessary Cookies
 ●  Performance Cookies
 ●  Functional Cookies
 ●  Targeting Cookies


Cookie List
A cookie is a small piece of data (text file) that a website – when visited by a user – asks your browser to store on your device in order to remember information about you, such as your language preference or login information. Those cookies are set by us and called first-party cookies. We also use third-party cookies – which are cookies from a domain different than the domain of the website you are visiting – for our advertising and marketing efforts. More specifically, we use cookies and other tracking technologies for the following purposes:

Strictly Necessary Cookies
These cookies are necessary for the website to function and cannot be switched off in our systems. They are usually only set in response to actions made by you which amount to a request for services, such as setting your privacy preferences, logging in or filling in forms. You can set your browser to block or alert you about these cookies, but some parts of the site will not then work. These cookies do not store any personally identifiable information.

Functional Cookies
These cookies enable the website to provide enhanced functionality and personalisation. They may be set by us or by third party providers whose services we have added to our pages. If you do not allow these cookies then some or all of these services may not function properly.

Performance Cookies
These cookies allow us to count visits and traffic sources so we can measure and improve the performance of our site. They help us to know which pages are the most and least popular and see how visitors move around the site. All information these cookies collect is aggregated and therefore anonymous. If you do not allow these cookies we will not know when you have visited our site, and will not be able to monitor its performance.

Targeting Cookies
These cookies may be set through our site by our advertising partners. They may be used by those companies to build a profile of your interests and show you relevant adverts on other sites. They do not store directly personal information, but are based on uniquely identifying your browser and internet device. If you do not allow these cookies, you will experience less targeted advertising.

How To Turn Off Cookies
You can choose to restrict or block Cookies through your browser settings at any time. Please note that certain Cookies may be set as soon as you visit the Website, but you can remove them using your browser settings. However, please be aware that restricting or blocking Cookies set on the Website may impact the functionality or performance of the Website or prevent you from using certain services provided through the Website. It will also affect our ability to update the Website to cater for user preferences and improve performance. Cookies within Mobile Applications

We only use Strictly Necessary Cookies on our mobile applications. These Cookies are critical to the functionality of our applications, so if you block or delete these Cookies you may not be able to use the application. These Cookies are not shared with any other application on your mobile device. We never use the Cookies from the mobile application to store personal information about you.

If you have questions or concerns regarding any information in this Privacy Policy, please contact us by email at . You can also contact us via our customer service at our Site.