Sản phẩm
Automatic Dip Soldering & Tin Dipping Machine for Filters — 987XL / 987XTL / 987XSTL
- Product details
-
AUTOMATIC SERIES · VERTICAL AUTOMATIC DIP SOLDERING & TIN DIPPING MACHINE (FILTER TYPE)
The 987XL / 987XTL / 987XSTL is a floor-standing vertical automatic dip soldering machine built for filters. It loads and unloads parts in matrix trays with an integrated pick-and-clamp head, and soldering runs with tin-level detection, solder rotation, pot translation and dual high / low temperature pots — the outer pins are dipped in the low-temperature pot and the inner pins in the high-temperature pot in one cycle. Built to order by FD in Dongguan, Guangdong, China. In the trade the same machine is also called an automatic tin dipping machine or a lead tinning machine — either way, the filter leads are dipped into molten solder automatically.
Product ParametersModel 987XL / 987XTL / 987XSTL Also Known As Automatic tin dipping machine · tinning machine · lead tinning machine Suitable Products Filters (dedicated model) Loading / Unloading Integrated pick-and-clamp, matrix loading Low-Temperature Solder Pot Outer pins, 400 × 125 × 50 mm High-Temperature Solder Pot Inner pins, 400 × 80 × 50 mm Machine Size (vertical) W730 × L1250 × H1600 mm Wooden Case Size 1650 × 1200 × 1 mm Weight 300 kg Installation Floor-standing, vertical Specifications are as listed in our catalogue. Pot sizes, tray layouts and functions can be adapted to your filter dimensions — send us your drawing for a proposal.
Function SetIntegrated pick-and-clamp with matrix loading — parts are picked, held and released automatically in tray positions
Tin-level detection — the head follows the solder surface, so every dip depth stays consistent as the level changes
Solder rotation and pot translation — the pot moves to the pins, giving clean, even coverage without manual alignment
Dual high / low temperature soldering — outer pins in the low-temperature pot, inner pins in the high-temperature pot, one cycle
Flux circulation — flux is applied and recirculated for uniform wetting
Water quench after soldering — parts are lowered into water to cool before unloading
Left-lift point dip — controlled lifting angle for clean pin finish
These are the standard functions of the 987X platform as supplied. Function combinations can be adapted to your process — tell us your soldering sequence and we will quote a matching configuration.
Dual-Pot Working ZonesPot Temperature Zone Solders Pot Size Low-temperature pot Low Outer pins of the filter 400 × 125 × 50 mm High-temperature pot High Inner pins of the filter 400 × 80 × 50 mm Splitting outer and inner pins across two temperature zones means each pin group is dipped at its own temperature in one automatic cycle — no re-handling between dips.
Product OverviewApplication FieldsFilter Pin Soldering
Inductor & Transformer Leads
Batch Matrix Dipping
Repeatable Pin Finishing
FeaturesDual High / Low Temperature Pots
Tin-Level Detection
Integrated Pick-and-Clamp Loading
Flux Circulation & Water Quench
AdvantagesOne Cycle, Both Pin Groups
No Manual Holding or Alignment
Consistent Dip Depth Batch After Batch
Factory Direct from Dongguan, China
Automatic Dip Soldering / Tin Dipping Machine RangeEvery machine is built to order in Dongguan, Guangdong, China. Send us your product, pin layout and output per shift for a machine recommendation and quotation.
Product Details
987XL overall view

Working area

Function diagram
Photographs are of the standard model. Tray layouts are adapted to your filter dimensions.
Product Demo Video
Contact us for a live working video or online demonstration.
Application ScenariosFilter Production Filters are dip-soldered in matrix trays: outer pins in the low-temperature pot and inner pins in the high-temperature pot in one automatic cycle, so a full tray is finished without re-handling. Two-Temperature Pin Groups Where outer and inner pins need different solder temperatures, the dual-pot design removes the second manual dip and keeps each group at its own setting. Consistent Dip Depth Tin-level detection follows the solder surface as it changes during the shift, so the dipped length on the pins stays the same from first tray to last. Same Platform, Other Products The 987 platform is also supplied as a transformer version (987ZL-360) and as the FD980 / FD987 series for toroidal inductors and transformers — ask us which type fits your product. How To UseLoad the matrix tray with filters — the integrated pick-and-clamp head takes each part from its tray position automatically.
Flux the pins — the flux circulation system wets the pin group evenly before dipping.
Dip the outer pins in the low-temperature pot. Tin-level detection keeps the dip depth constant while solder rotation and pot translation bring the solder to the pins.
Dip the inner pins in the high-temperature pot in the same cycle — no manual re-handling between the two dips.
Cool and release — the head lowers the soldered parts into the water quench, then releases them back into the tray positions.
Keep the pots topped up and skimmed so the solder surface stays clean; tin-level detection handles the rest.
⚠ Safety notice: molten solder operates at high temperature — never reach into the pot area while the machine runs, keep the work area dry (molten solder and water contact can cause splatter outside the quench station), use heat-resistant gloves during pot maintenance, and isolate the power supply before any service.Frequently Asked QuestionsQ1: What is an automatic dip soldering machine?
It is a machine that dips component pins into molten solder automatically instead of by hand. The 987XL / 987XTL / 987XSTL is a floor-standing vertical model for filters: it loads parts in matrix trays with an integrated pick-and-clamp head and dips the pins with tin-level detection, solder rotation and pot translation, so the operator only loads and unloads trays. The same machine is also called an automatic tin dipping machine or a lead tinning machine — all three names describe this equipment.
Q2: How automatic is it — do I still need to hold the parts?
No. Loading and unloading use an integrated pick-and-clamp head with matrix trays, and the dipping sequence — fluxing, tin-level following, soldering, cooling — runs automatically, so no part is held by hand at any point in the cycle.
Q3: Why does this model have two solder pots?
Filters have two pin groups that solder best at different temperatures. The low-temperature pot (400 × 125 × 50 mm) solders the outer pins and the high-temperature pot (400 × 80 × 50 mm) solders the inner pins, so both groups are finished in one automatic cycle.
Q4: How is it different from hand dipping in a solder pot?
Hand dipping depends on the operator for angle, depth and timing. This machine detects the solder surface and controls rotation, translation and lifting automatically, so dip depth and pin finish stay consistent from batch to batch — and the dual-pot design removes the second manual dip entirely.
Q5: Can it be adapted to my filter size?
Yes. The machine is built to order in Dongguan, Guangdong, China; tray layouts and pot configurations are adapted to your filter dimensions. Send us your drawing, pin layout and output per shift and we will propose the configuration and quotation.
Q6: Which industries use an automatic dip soldering machine like this?
This model is dedicated to filters. The same 987 platform is also supplied for transformers (987ZL-360) and for toroidal inductors and transformers (FD980 / FD987 series) — wherever leaded components must be dip-soldered in batches with repeatable results.
Need automatic dip soldering for your filters?OEM / ODM available · Dual high / low temperature pots · Tin-level detection · Matrix loading · Factory direct from Dongguan, China · Layout drawing on requestGet a Quote
related products
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
Yêu cầu sản phẩm
Vui lòng để lại tin nhắn của bạn, chúng tôi sẽ liên hệ với bạn nhanh chóng sau khi nhận được nó, cảm ơn bạn đã hỗ trợ của bạn!
common problem
Q
What are the characteristics of cigarette box three-dimensional packaging machine?
A
1. There is no need to adjust the height of the countertops on both sides of the machine when changing the mold, and there is no need to disassemble and assemble the discharge chain or put the hopper, which shortens the four-hour mold replacement time of the traditional machine to only 30 minutes.
2. Adopting a new dual insurance mechanism, the machine does not need to be shut down when it is not running synchronously, nor will it damage other parts.
3. The original one-way hand crank device prevents the machine from shaking in reverse, and the handwheel does not rotate during operation, making the operator safer.
4. The new double rotary film cutting knife can ensure that the machine can be used continuously for many years without a sharpening port, overcoming the defect that the traditional fixed single rotary film cutting blade is easy to wear.
Q
Automatic poker transparent film three-dimensional packaging machine packaging products?
A
Automatic poker transparent film three-dimensional packaging machine is mainly suitable for bulk poker, compressed biscuits, sachima, stickers, sticky notes, wafer biscuits and other bulk or multi-object collection of three-dimensional packaging.
Địa chỉ email:
Đường dây nóng:
English
繁体中文
简体中文
Deutsch
Tiếng Việt