Products
Ultrasonic Cleaner with Hot Air Dryer
- Product details
-
AUTOMATIC SERIES · ULTRASONIC CLEANING + HOT-AIR DRYING LINE
A complete clean-to-dry line built around the FD-400330300TK automatic three-tank ultrasonic cleaner. Parts leave the hot rinse tank already at elevated temperature and go straight into a dedicated drying station — a forced-air drying oven for batch work or a five-stage circulating oven for continuous flow, with an optional preheat box for temperature-sensitive parts. Every station is supplied and warranted by the same factory, so the line is matched, installed and serviced as one system.
Line ConfigurationStage Equipment Model Function in the Line 1–3 Three-tank automatic ultrasonic cleaner FD-400330300TK PLC-controlled ultrasonic wash, ultrasonic rinse and hot rinse with automatic water fill and drain. 4 (option) Preheat box FD33027020Y 1000 W flat preheating station; evaporates surface water and pre-warms parts before drying. 4 or 5 Forced-air drying oven (vertical) Vertical thermostatic type Thermostatic forced-air circulation dries batches quickly and evenly; recommended for standard throughput. 4 or 5 Five-stage circulating temperature-controlled oven 5-stage circulation type Five temperature stages with circulating air keep several batches moving at once; recommended for higher throughput. Two proven layouts: Layout A — TK cleaner + forced-air drying oven (compact, batch drying); Layout B — TK cleaner + five-stage circulating oven (higher throughput). The preheat box is optional in both. Tell us your floor space and parts per shift and we will propose the layout and quotation.
Component SpecificationsComponent Key Specifications Three-tank automatic cleaner
FD-400330300TK15 transducers × 3 tanks · ultrasonic 900 W × 3 · heating 1800 W × 3 · tank (each) 400 × 330 × 300 mm · overall 1580 × 580 × 800 mm · PLC touch screen · 3 tanks independent, automatic water fill and drain Forced-air drying oven
(vertical)Vertical cabinet, electric heating with thermostatic control and forced-air (fan-assisted) circulation for uniform batch drying. Detailed datasheet on request. Preheat box
FD33027020YPower 1000 W · inner size 330 × 270 × 20 mm · outer size 390 × 330 × 90 mm · 450 mm height with lid open · flat layout for trays and small parts Five-stage circulation oven Five temperature stages with circulating-air temperature control for continuous multi-batch drying. Detailed datasheet on request. Power Supply 220 V / 380 V depending on station (confirm at order for your plant) Place of Origin Dongguan, Guangdong, China All components are standard catalogue machines and can also be purchased separately. Voltages, tank sizes and oven capacities can be customized.
Automation & PLC ControlThe automatic core of the line is the TK cleaner's PLC: it fills each tank to level, heats to the set temperature, runs the ultrasonic cycle, drains, and repeats — while monitoring water level and temperature and signalling the machine state on the panel lamps.
Digital Inputs (X) Start / stop push-button (momentary) · high water level switch · low water level switch · three temperature sensors (one per tank) Digital Outputs (Y) Water inlet valve · drain valve · drain pump motor · ultrasonic generator · heater 1 / 2 / 3 · three-colour indicator lamp · buzzer alarm Status Lamps Green — running (ultrasonic active) · Yellow — standby / temperature or water level not yet reached · Red — stop, alarm, low water level or emergency stop Protection Low-level cut-off prevents dry running · high-level switch stops the inlet valve · temperature monitoring per tank · start blocked until fill and temperature conditions are satisfied The drying stations run on their own thermostats, so the line can also be operated station-by-station when required. Cycle logic is programmable — tell us your process step order and we will adapt it.
Accessories & Spare PartsCleaning basket × 1 per tank on the TK cleaner — lifts parts in and out without touching the tank floor
Lid / cover for each tank — keeps heat in and reduces evaporation
Water inlet valve, drain valve and drain pump motor — solenoid operated, PLC controlled
Level switches and temperature sensors — high / low level and one temperature sensor per tank
Ultrasonic transducers and stainless steel immersion heaters — replaceable
Touch-screen PLC panel, power cables and operation manuals for every station
Drying stations are supplied ready to run. Tell us your basket and tray sizes and we will match them to the oven chambers. Spare valves, level switches, heaters and transducers are available separately.
User ManualOperating instructions, PLC parameter guidance, cleaning-solution guidance and maintenance manual
USER MANUAL PDFEnglish manual available. Chinese manual, PLC program listing and electrical drawing available on request.
Product Demo Video
Contact us for a live working video or online demonstration.
Product OverviewApplication FieldsContinuous Workshop Cleaning Lines
Hardware & Machined Parts
Engine & Automotive Components
Mould & Die Cleaning
FeaturesWash + Rinse + Dry in One Flow
PLC Automatic Water Management
Two Drying Layouts to Choose
One Factory, One Warranty
AdvantagesNo Manual Handling Between Stages
Fast, Uniform Hot-Air Drying
Stations Also Sold Separately
Factory Direct Price
Line ComponentsEvery component is a standard catalogue machine and can be purchased separately. Send us your parts, throughput and floor space for a matched line layout and quotation.
Drying Station ComparisonItem Forced-Air Drying Oven 5-Stage Circulation Oven Preheat Box FD33027020Y Role in the Line Main batch drying station Main drying station, higher throughput Optional pre-dry / preheat assist Airflow Forced-air (fan-assisted) circulation Circulating air, five temperature stages Flat heated plate chamber Best For Standard batches, compact floorspace Several batches moving at once Trays and small parts Layout Layout A (compact) Layout B (throughput) Add-on for either layout Hot rinsing in the TK cleaner already leaves parts warm; a drying station removes the remaining film water and prevents flash rust before packing.
Product Details
FD-400330300TK cleaner

Forced-air drying oven

Preheat box FD33027020Y

5-stage circulation oven

Drying oven detail 1

Drying oven detail 2

Drying oven detail 3

Drying oven detail 4
Photographs are of the standard components. Line layouts are adapted to your floor space.
Application ScenariosClean-to-Pack Flow Parts leave the hot rinse already warm, finish drying in the forced-air oven, and go straight to inspection and packing — no water film, no flash rust between cleaning and packing. Rust-Sensitive Parts Steel and iron components that rust quickly after wet cleaning benefit from the short path between hot rinse and hot-air drying; the preheat box can add a final surface-dry step. Continuous Production With the five-stage circulating oven, several baskets move through the drying stages at once while the TK cleaner keeps washing the next batch. Engine & Mould Cleaning Cylinder heads, gearbox parts and injection moulds cleaned in three ultrasonic stages, then dried and handed back ready for assembly or storage. How To UseFill each tank of the TK cleaner to the working level and confirm the level switches read correctly. The PLC blocks the start sequence until fill and temperature conditions are satisfied.
Set the temperatures on the touch screen (typically 40–60 °C for degreasing) and switch on the drying station so it reaches working temperature while the first basket washes.
Run the three stages: ultrasonic wash, ultrasonic rinse, hot rinse. Transfer the basket at the end of each stage; the tanks run independently.
Dry the parts: transfer the basket from the hot rinse directly into the drying station. Use the preheat box first for trays and small parts if needed.
Unload, inspect and pack as soon as drying is complete — warm, dry parts take protective oil or packaging without flash rust.
Keep the line running: the cleaner fills and drains automatically between batches; with the five-stage oven a second basket can enter drying while the first cools.
Maintain daily: check level switches, valves and the drain pump on the cleaner, and empty the drying station's condensate / clean the chamber at the end of each shift.
⚠ Safety notice: never operate the ultrasonic cleaner without liquid in a tank, do not defeat the level switches, keep hands out of tanks and ovens while they run, use only cleaning agents compatible with stainless steel, and isolate the power supply before maintenance or draining. Drying chambers stay hot after switch-off — use heat-resistant gloves.Frequently Asked QuestionsQ1: Do you have an all-in-one ultrasonic washer-dryer machine?
We build the line as matched stations: the FD-400330300TK three-tank automatic ultrasonic cleaner plus a dedicated hot-air drying station — a vertical forced-air drying oven or a five-stage circulating oven — configured and warranted as one system by one factory in Dongguan, Guangdong, China.
Q2: How does drying work after ultrasonic cleaning?
Parts leave the hot rinse tank already warm and go straight into the drying station. A flat preheat box FD33027020Y (1000 W, inner 330 × 270 × 20 mm) is available to evaporate surface water from trays and small parts before oven drying.
Q3: Which layout should I choose?
Layout A — cleaner + forced-air drying oven — suits compact batch drying; Layout B — cleaner + five-stage circulating oven — suits continuous higher throughput. Send your floor space and parts per shift and we will propose the layout and quotation.
Q4: What is an ultrasonic cleaning and drying line?
It is a continuous clean-to-dry process in which a multi-tank automatic ultrasonic cleaner (ultrasonic wash, ultrasonic rinse, hot rinse) is followed directly by a hot-air drying station, so parts leave the line clean and dry in one flow instead of being washed in one place and dried in another. On this line the cleaner is the FD-400330300TK and the drying station is a forced-air drying oven or a five-stage circulating oven.
Q5: Can I buy only the cleaner, or only the dryer?
Yes. The ultrasonic cleaner and the drying oven can each be supplied as a standalone machine, and both can also be configured together as one line. Buying them as a line means one factory, one set of interfaces and one warranty covering the whole clean-to-dry process.
Q6: Which industries use a wash-and-dry line like this?
It is used where parts must be clean and dry before the next step: inductor and transformer pins, connectors and terminals, hardware and machined parts, moulded and stamped components, and metal parts that would flash-rust if left wet. Tell us your part, output per shift and cleanliness requirement and we will recommend the tanks, temperatures and drying method.
Need a clean-to-dry line, not just a cleaner?OEM / ODM available · Wash + rinse + dry configured as one line · Two drying layouts · One factory, one warranty · Factory direct from Dongguan, China · Layout drawing on requestGet a Quote
related products
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
Product Inquiry
Please leave your message, we will contact you quickly after receiving it, thank you for your support!
common problem
Q
What are the characteristics of cigarette box three-dimensional packaging machine?
A
1. There is no need to adjust the height of the countertops on both sides of the machine when changing the mold, and there is no need to disassemble and assemble the discharge chain or put the hopper, which shortens the four-hour mold replacement time of the traditional machine to only 30 minutes.
2. Adopting a new dual insurance mechanism, the machine does not need to be shut down when it is not running synchronously, nor will it damage other parts.
3. The original one-way hand crank device prevents the machine from shaking in reverse, and the handwheel does not rotate during operation, making the operator safer.
4. The new double rotary film cutting knife can ensure that the machine can be used continuously for many years without a sharpening port, overcoming the defect that the traditional fixed single rotary film cutting blade is easy to wear.
Q
Automatic poker transparent film three-dimensional packaging machine packaging products?
A
Automatic poker transparent film three-dimensional packaging machine is mainly suitable for bulk poker, compressed biscuits, sachima, stickers, sticky notes, wafer biscuits and other bulk or multi-object collection of three-dimensional packaging.
E-mail address:
Hotline:
English
繁体中文
简体中文
Deutsch
Tiếng Việt