Products
Touch-Screen Industrial Oven FD1000600500C
- Product details
-
STANDARD SERIES · TOUCH-SCREEN INDUSTRIAL OVEN FD1000600500C (MULTI-STAGE · TEMPERATURE-CURVE OUTPUT)
The Touch-Screen Industrial Oven FD1000600500C is the programmable version of the 900-litre standard cabinet: the same 6.5 kW hot-air-circulation chamber, driven by a touch-screen controller that runs multi-stage heating programmes and outputs the temperature curve. Set a soak-hold-cool profile once and every batch follows it exactly — the way to bake repeatability into coating, curing and ageing work. Also listed as a programmable industrial oven, an industrial drying oven or a hot air circulation oven.
Product ParametersModel FD1000600500C — Touch-Screen Industrial Oven Also Known As Programmable Industrial Oven · Industrial Drying Oven · Hot Air Circulation Oven Control Touch-screen controller · multi-stage heating · temperature-curve output Heating power 6.5 kW · 3-stage heating plates, relay controlled Voltage 220 V / 380 V optional · 50 Hz Internal chamber 600 W × 500 D × 1000 H mm · 900 L External dimensions 850 W × 650 D × 1640 H mm Temperature range RT +15 – 250 °C · approx. 45 min to 250 °C Temperature control PID ±0.3 °C · uniformity ±2.5 % · fluctuation ±0.5 °C · resolution ±0.1 °C Shelves 9 layers · 9 galvanized perforated trays 585 × 470 × 15 mm · 50 kg per layer Chamber / housing 1.2 mm mirror stainless steel chamber · 1.2 mm cold-rolled steel housing, powder coated Timer LED digital timer 0–9999 H/M/S with automatic heating cut-off Specification rows are transcribed from the factory sheet attached to the listing; the listing itself carries no parameter table.
Function SetMulti-stage programmes on a touch screen — ramp, soak and hold segments are programmed on the panel, so a whole thermal profile runs unattended instead of being re-set by hand at every step.
Temperature-curve output — the controller records and outputs the actual curve, giving you a process record for every batch without extra instruments.
6.5 kW three-stage heating — relay-controlled heating plates bring the 900 L chamber from room temperature to 250 °C in about 45 minutes.
Horizontal hot-air circulation — long-shaft high-temperature axial fan with stainless turbine blades, left-to-right flow through finned perforated side plates.
PID accuracy with alarms — ±0.3 °C control accuracy, sensor-break alarm and over-temperature alarm built into the controller.
Nine-tray batch capacity — nine galvanized perforated trays, each layer rated 50 kg, in a mirror stainless steel chamber.
Product OverviewApplication Fields Features Advantages Processes that need defined thermal profiles: coating cure schedules, adhesive curing, ageing tests and staged preheating in electronics and printing. Touch-screen multi-stage programming, temperature-curve output, 6.5 kW, 900 L chamber, RT +15–250 °C, PID ±0.3 °C, nine 50 kg trays. Repeatable profiles batch after batch, with the curve on record; same platform and chambers as the standard PID model. Standard Oven RangeFloor-standing explosion-proof models with trolley loading are listed separately — ask for the explosion-proof series with your enquiry.
Product Details
Product overview with model plate

Programmable controller showing the temperature curve

Open door view with chamber dimensions
The full factory specification sheet for this model is available as a PDF on request.
Application ScenariosCure schedules Paint, powder-coating and adhesive cure windows that specify ramp, soak and cool stages — programmed once, then repeated identically. Ageing & burn-in Electronics ageing runs with recorded curves, so the thermal history of every batch is documented without extra recorders. Process development Trialling new profiles on the touch screen, then locking the winning programme in for production. How To UsePlace the oven on a level floor, connect to a 220 V or 380 V supply, and load the trays evenly — up to 50 kg per layer.
On the touch screen, programme the stages: ramp rate, soak temperature, hold time and final cooling step.
Start the programme; the three heating stages follow the profile while the controller logs the actual curve.
Export or note the curve at the end of the run for your batch record.
Save the validated programme and recall it for every production batch of that part number.
After the shift, switch off, vent the chamber, and wipe the stainless chamber when it has cooled.
Safety note: the chamber works up to 250 °C and the housing surface can still exceed room temperature by up to 45 °C. Use heat-resistant gloves, keep the air inlet and outlet clear, and do not process flammable solvents in this standard series.
FAQQ1: What does the "C" in FD1000600500C add over the standard model?
A: The touch-screen controller. It runs multi-stage heating programmes and outputs the temperature curve, while the standard FD1000600500 holds one constant set point.
Q2: Can I export the temperature curve?
A: Yes — curve output is a core function of this model, so each batch leaves a thermal record you can attach to your process documentation.
Q3: Is the chamber the same size as the standard model?
A: Yes — 600 × 500 × 1000 mm (W × D × H), 900 litres, with the same nine trays of 585 × 470 × 15 mm rated 50 kg per layer.
Q4: Which supply voltage should I order?
A: 220 V and 380 V are both orderable options at the same price; pick the one that matches your workshop supply.
Q5: How fast does it reach 250 °C?
A: About 45 minutes from room temperature with the 6.5 kW three-stage heating, per the factory specification sheet.
Q6: Can it run flammable-solvent processes?
A: No — this is the standard series. For solvent-bearing processes we build the floor-standing explosion-proof series with a pressure-relief rear door.
Need a quotation for the Touch-Screen Industrial Oven FD1000600500C?
Send us your cure or ageing profile — we confirm the stage structure and voltage with the quotation.
Get a Quote
related products
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
Product Inquiry
Please leave your message, we will contact you quickly after receiving it, thank you for your support!
common problem
Q
What are the characteristics of cigarette box three-dimensional packaging machine?
A
1. There is no need to adjust the height of the countertops on both sides of the machine when changing the mold, and there is no need to disassemble and assemble the discharge chain or put the hopper, which shortens the four-hour mold replacement time of the traditional machine to only 30 minutes.
2. Adopting a new dual insurance mechanism, the machine does not need to be shut down when it is not running synchronously, nor will it damage other parts.
3. The original one-way hand crank device prevents the machine from shaking in reverse, and the handwheel does not rotate during operation, making the operator safer.
4. The new double rotary film cutting knife can ensure that the machine can be used continuously for many years without a sharpening port, overcoming the defect that the traditional fixed single rotary film cutting blade is easy to wear.
Q
Automatic poker transparent film three-dimensional packaging machine packaging products?
A
Automatic poker transparent film three-dimensional packaging machine is mainly suitable for bulk poker, compressed biscuits, sachima, stickers, sticky notes, wafer biscuits and other bulk or multi-object collection of three-dimensional packaging.
E-mail address:
Hotline:
English
繁体中文
简体中文
Deutsch
Tiếng Việt

