Products
Single-Tank Industrial Ultrasonic Cleaner with Heating
- Product details
-
STANDARD SERIES · SINGLE-TANK ULTRASONIC CLEANER
Industrial single-tank ultrasonic cleaning machines with built-in heating. One tank does the whole job — ultrasonic cleaning and hot-solution degreasing in the same chamber. Available from a compact 1600-unit commercial model up to a high-power 39-transducer reinforced version.
Product ParametersProduct Type Single-tank industrial ultrasonic cleaner with heating Model FD-400330300 series Tank Size 400 L × 330 W × 300 D mm Transducers 12 pcs (standard) · 39 pcs (reinforced type) Ultrasonic Power 600 W standard · 2340 W reinforced Heating Power 2000 W standard · 1800 W reinforced Machine Size 620 × 550 × 700 mm (reinforced type) Net Weight 41 kg (FD-400330300) Cleaning Method Ultrasonic cavitation + heated cleaning solution Power Supply 220 V (confirm at order for your plant) Place of Origin Dongguan, Guangdong, China Selling Unit 1 set / unit Specifications are for reference. Tank size, transducer count, power and voltage can be customized — contact us for the full datasheet.
Accessories & Spare PartsStainless steel cleaning basket × 1 — lifts parts in and out without touching the tank floor
Lid / cover × 1 — keeps heat in and reduces evaporation
Drain valve — for emptying the tank after use
Ultrasonic transducers — replaceable, bonded to the tank bottom
Heating element — stainless steel immersion heater
Power cable and operation manual × 1
Baskets, lids and spare transducers are available separately. Tell us the parts you clean and we will recommend the right tank size and transducer layout.
User ManualOperating instructions, cleaning-solution guidance and maintenance manual
USER MANUAL PDFEnglish manual available. Chinese manual and wiring diagram available on request.
Product Demo Video
Contact us for a live working video or online demonstration.
Product OverviewApplication FieldsHardware & Machined Parts
Engine & Automotive Components
Mould & Die Cleaning
Electronic Assemblies
FeaturesDegreasing & Derusting in One Tank
12 Transducers, 600 W Ultrasonic
2000 W Built-in Heating
No Dead Corners, Deep Penetration
AdvantagesCompact, Low Water Consumption
Reinforced 39-Transducer Option
Factory Direct Price
Spare Parts & After-sales Support
Product Type · Single-Tank ModelsNeed a different tank size or transducer count? Tell us your workpiece dimensions and throughput, and we will specify the right model.
Single-Tank Model ComparisonModel Transducers Ultrasonic Power Heating Power Tank Size FD-400330300 12 pcs 600 W 2000 W 400 × 330 × 300 mm FD-400330300-39 39 pcs 2340 W 1800 W 400 × 330 × 300 mm FD-400330300 (large) 12 pcs 600 W 2000 W Larger tank option Commercial model Compact Entry level With heating Bench-top The reinforced 39-transducer version gives roughly four times the ultrasonic power in the same tank footprint — recommended for heavy rust, thick grease and dense part loads.
Product Details
FD-400330300 overall view

Control panel & timer

39-transducer reinforced version

Transducer layout

Basket & tank interior

Heating element & drain

Large tank model

Commercial model
Photographs are of standard models. Custom tank sizes may differ in appearance.
Application ScenariosDegreasing Removal of cutting oil, stamping oil and grease from machined parts, with the heated solution breaking down heavy deposits before the ultrasonic wave lifts them off. Derusting Light to medium rust removal on steel and iron components. The 39-transducer reinforced version handles heavier corrosion. Engine & Auto Parts Cleaning of cylinder heads, carburettor bodies, gearbox parts and other components with complex internal passages that brushes cannot reach. Mould & Die Cleaning Removal of release agent, burnt-on plastic and carbon deposits from injection moulds without abrasive damage to the cavity surface. How To UseFill the tank with water or cleaning solution to the working level — never run the machine dry, the transducers and heater will be damaged.
Switch on the heating and set the working temperature for your soil type (typically 40–60 °C for degreasing).
Load the parts into the basket and lower it into the tank. Do not let parts rest directly on the tank bottom — this blocks the ultrasonic wave.
Set the cleaning timer (typically 5–20 minutes depending on soil and part complexity) and start the ultrasonic cycle.
Lift the basket out when the cycle ends and inspect the parts. Repeat if needed, or extend the time for stubborn deposits.
Rinse the parts in clean water and dry them. For rust-sensitive parts, apply a protective oil promptly.
Drain and clean the tank after use. Change the solution regularly — contaminated solution reduces cleaning efficiency.
⚠ Safety notice: never operate the ultrasonic cleaner without liquid in the tank, keep hands out of the tank while the ultrasonic power is on, use only cleaning agents compatible with stainless steel, and isolate the power supply before maintenance or draining.Need a single-tank cleaning solution?OEM / ODM available · Custom tank size and transducer count · Factory direct from Dongguan, China · Spare parts supplied · Sample testing supportedGet a Quote
related products
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
Product Inquiry
Please leave your message, we will contact you quickly after receiving it, thank you for your support!
common problem
Q
What are the characteristics of cigarette box three-dimensional packaging machine?
A
1. There is no need to adjust the height of the countertops on both sides of the machine when changing the mold, and there is no need to disassemble and assemble the discharge chain or put the hopper, which shortens the four-hour mold replacement time of the traditional machine to only 30 minutes.
2. Adopting a new dual insurance mechanism, the machine does not need to be shut down when it is not running synchronously, nor will it damage other parts.
3. The original one-way hand crank device prevents the machine from shaking in reverse, and the handwheel does not rotate during operation, making the operator safer.
4. The new double rotary film cutting knife can ensure that the machine can be used continuously for many years without a sharpening port, overcoming the defect that the traditional fixed single rotary film cutting blade is easy to wear.
Q
Automatic poker transparent film three-dimensional packaging machine packaging products?
A
Automatic poker transparent film three-dimensional packaging machine is mainly suitable for bulk poker, compressed biscuits, sachima, stickers, sticky notes, wafer biscuits and other bulk or multi-object collection of three-dimensional packaging.
E-mail address:
Hotline:
English
繁体中文
简体中文
Deutsch
Tiếng Việt