+

FD-305 Electric Enamel Stripping Machine

FD-305 Electric Enamel Stripping Machine: 2800 r/min motor, tungsten heads 2SC-8SC for 0.4-4.5 mm wire, adjustable strip length, 220 V. Dongguan, China.
  • Product details
  • Wire Peeling Series · Luoyiyun · Dongguan, China
    ELECTRIC ENAMEL STRIPPING MACHINE · FD-305 · Bench-top blade type

    The FD-305 Electric Enamel Stripping Machine is a bench-top blade-type machine for enameled wire, three-layer insulated wire and multi-strand wire: a 2800 r/min high-speed motor spins the wire end against a tungsten-steel peeling head, so the insulation is scraped off cleanly without cutting into the copper. The peeling length is set with the position stop, and interchangeable heads cover wire from 0.4 to 5.5 mm (tungsten heads 2SC - 8SC cover 0.4 - 4.5 mm). Also listed as an enameled wire stripping machine, a wire enamel removing machine or a magnet wire stripper.

    Product Parameters
    ModelFD-305
    BrandLuoyiyun
    Product TypeElectric blade-type enamel stripping machine
    Also Known AsEnameled wire stripping machine / wire enamel removing machine / magnet wire stripper
    Wire Diameter Range0.4 – 5.5 mm (catalogue); stocked tungsten heads 2SC–8SC cover 0.4 – 4.5 mm
    Peeling LengthAdjustable / positionable
    MotorHigh-speed motor, 2800 r/min
    Power120 W
    Power Supply220 V / 50 Hz
    Peeling HeadTungsten steel; 8 mm flat head (2SC–8SC) and 6 mm tapered head (2BF–8BF)
    Machine SizeBench-top, compact
    Place of OriginDongguan, China
    Selling Unit1 set / unit — heads and holders sold separately (see chart below)

    Specifications are for reference. Voltage, plug type and peeling head can be customized for your market — contact us for the full datasheet.

    Function Set
    • High-speed motor, 2800 r/min — spins the wire against the blade for a clean, repeatable strip.

    • Tungsten-steel peeling head — a hard blade edge that resists wear and can be re-ground instead of thrown away.

    • Interchangeable heads, 2SC – 8SC — one machine covers 0.4 – 4.5 mm; swap the head to match the wire gauge.

    • Position stop for peeling length — set the strip length once and every wire end comes out the same.

    • Two head profiles — 8 mm flat head for general work, 6 mm tapered head for tight ends.

    • Bench-top footprint — sits at the winding bench; plug into 220 V and start stripping.

    Product Overview
    Application Fields
    • Transformer & inductor winding

    • Enameled / magnet wire processing

    • Three-layer insulated wire

    • Wire & cable assembly lines

    Features
    • 2800 r/min high-speed motor

    • Tungsten-steel peeling head

    • Adjustable peeling length

    • Interchangeable head sizes

    Advantages
    • Regrind the blade instead of stocking spares

    • Heads & holders in stock

    • Factory direct from Dongguan

    • Sample testing supported

    Enamel Stripping Machine Range
    FD-305 Electric Enamel Stripping Machine(Image1)
    Electric · blade type
    FD-305 Electric Enamel Stripping Machine
    2800 r/min motor · tungsten heads 2SC–8SC · 0.4 – 5.5 mm · 120 W · 220 V
    FD-305 Electric Enamel Stripping Machine(Image2)
    Heating type · hot block
    Heating-Type Enamel Stripping Machine
    Copper block 150 × 60 × 25 mm · max 450 °C · digital PV/SV control · no blades
    Product Details
    FD-305 Electric Enamel Stripping Machine(Image3)

    Overall front view

    FD-305 Electric Enamel Stripping Machine(Image4)

    Peeling head — tungsten steel blade

    FD-305 Electric Enamel Stripping Machine(Image5)

    High-speed motor with ON/OFF switch

    FD-305 Electric Enamel Stripping Machine(Image6)

    Side view — motor & housing

    FD-305 Electric Enamel Stripping Machine(Image7)

    Three-quarter view on the bench

    FD-305 Electric Enamel Stripping Machine(Image8)

    Factory head size chart (SC / BF series)

    Product Demo Video
                 

    ▶ Watch the demo video (opens in a new tab)

    Peeling Head & Parts Chart

    One FD-305 takes interchangeable heads. Each head covers a fixed wire-diameter band — pick the band that contains your wire. Prices below are the live mall prices at extraction time.

    8 mm flat headWire range (mm)6 mm tapered headWire range (mm)Price (SC series)
    2SC0.4 – 0.852BF0.4 – 0.85¥90
    3SC0.86 – 1.123BF0.86 – 1.12¥90
    4SC1.13 – 1.684BF1.13 – 1.68¥90
    5SC1.69 – 2.255BF1.69 – 2.25¥90
    6SC2.26 – 2.86BF2.26 – 2.8¥90
    7SC2.81 – 3.377BF2.81 – 3.37¥90
    8SC3.38 – 4.58BF3.38 – 4.5¥80
    ItemSpecificationPrice
    Blade holder11 / 12 / 14 / 15 mm¥380 – 420 by size
    Machine FD-305Standard bench-top set¥1100
    Machine FD-305XExtended model — quote on request¥1600

    The tapered BF series is on the factory chart and is quoted against your inquiry; the mall stocks the SC series. Head 4SC-32 (1.13 – 1.68 mm) is also stocked at ¥90.

    Application Scenarios
    • Transformer & inductor winding — strip lead ends before tinning; pairs with our dip soldering machines and solder pots.

    • Wire & cable assembly — batch-strip multi-strand and enameled ends at a fixed length.

    • Coil & motor rewinding — clean copper ends on magnet wire without chemicals.

    • Repair & rework — one-off stripping at the bench with the head matched to the gauge.

    How To Use
    1. Check the head and blade for damage; make sure the power switch is at OFF before plugging in.

    2. Fit the head whose wire band contains your wire diameter (see the chart above).

    3. Set the peeling length with the position stop, then fix the wire to be processed.

    4. Switch on and feed the wire end into the peeling head at a steady speed.

    5. Inspect the strip; correct leftover insulation with small adjustments only.

    6. After use switch off, let the unit cool and clean swarf from the head and base.

    ⚠ Safety notice: the motor spins the wire against a sharp tungsten blade — keep fingers clear of the peeling head, wear safety glasses, and disconnect the power before changing heads or holders.
    FAQ

    Q1: Which wire does the FD-305 take?

    A: Enameled (magnet) wire, three-layer insulated wire and multi-strand wire. The machine catalogue range is 0.4 – 5.5 mm; the stocked tungsten heads 2SC – 8SC cover 0.4 – 4.5 mm, and the tapered BF series extends the range against your inquiry.

    Q2: How do I choose the head size?

    A: Each head covers a fixed band — for example 4SC covers 1.13 – 1.68 mm. Send us your wire diameter and we will confirm which heads to put on the order.

    Q3: How long does a head last, and can it be re-sharpened?

    A: The head is tungsten steel, which resists wear well. The edge can be re-ground, so many benches keep two heads in rotation instead of stocking disposables.

    Q4: Will it damage the copper strand?

    A: The blade only touches the insulation when the head is matched to the wire band and fed steadily. Send us a sample of your wire and we will run a strip test before you order.

    Q5: Can you supply other voltages or plugs?

    A: The standard supply is 220 V / 50 Hz. Voltage and plug type can be customized for your market — confirm it on the quotation.

    Q6: What is the lead time?

    A: Stock machines and heads ship in 3 – 7 days; customized units are quoted separately. Standard export carton, foam-protected.

     
    Need a stripping line, not just a machine?
    OEM / ODM available · Custom voltage and peeling head · Factory direct from Dongguan, China · Sample testing supported
    Get a Quote

Previous:

Next:

Product Inquiry

Please leave your message, we will contact you quickly after receiving it, thank you for your support!

FD-305 Electric Enamel Stripping Machine
  • What kind of product do you need?
  • What's your budget?
  • What other information do you need to know?

common problem

Q

What are the characteristics of cigarette box three-dimensional packaging machine?


A

Main features:
1. There is no need to adjust the height of the countertops on both sides of the machine when changing the mold, and there is no need to disassemble and assemble the discharge chain or put the hopper, which shortens the four-hour mold replacement time of the traditional machine to only 30 minutes.
2. Adopting a new dual insurance mechanism, the machine does not need to be shut down when it is not running synchronously, nor will it damage other parts.
3. The original one-way hand crank device prevents the machine from shaking in reverse, and the handwheel does not rotate during operation, making the operator safer.
4. The new double rotary film cutting knife can ensure that the machine can be used continuously for many years without a sharpening port, overcoming the defect that the traditional fixed single rotary film cutting blade is easy to wear.

Q

Automatic poker transparent film three-dimensional packaging machine packaging products?


A

Automatic poker transparent film three-dimensional packaging machine packaging products
Automatic poker transparent film three-dimensional packaging machine is mainly suitable for bulk poker, compressed biscuits, sachima, stickers, sticky notes, wafer biscuits and other bulk or multi-object collection of three-dimensional packaging.

If you want to know more about the details of a certain company, please visit our official website where there is comprehensive and in-depth information for you to check!


Copyright © 2026奥拓科技

Leave your message

If you have any suggestions or questions for us, please feel free to contact us!

We use cookie to improve your online experience. By continuing to browse this website, you agree to our use of cookie.

Cookies

Please read our Terms and Conditions and this Policy before accessing or using our Services. If you cannot agree with this Policy or the Terms and Conditions, please do not access or use our Services. If you are located in a jurisdiction outside the European Economic Area, by using our Services, you accept the Terms and Conditions and accept our privacy practices described in this Policy.
We may modify this Policy at any time, without prior notice, and changes may apply to any Personal Information we already hold about you, as well as any new Personal Information collected after the Policy is modified. If we make changes, we will notify you by revising the date at the top of this Policy. We will provide you with advanced notice if we make any material changes to how we collect, use or disclose your Personal Information that impact your rights under this Policy. If you are located in a jurisdiction other than the European Economic Area, the United Kingdom or Switzerland (collectively “European Countries”), your continued access or use of our Services after receiving the notice of changes, constitutes your acknowledgement that you accept the updated Policy. In addition, we may provide you with real time disclosures or additional information about the Personal Information handling practices of specific parts of our Services. Such notices may supplement this Policy or provide you with additional choices about how we process your Personal Information.


Cookies

Cookies are small text files stored on your device when you access most Websites on the internet or open certain emails. Among other things, Cookies allow a Website to recognize your device and remember if you've been to the Website before. Examples of information collected by Cookies include your browser type and the address of the Website from which you arrived at our Website as well as IP address and clickstream behavior (that is the pages you view and the links you click).We use the term cookie to refer to Cookies and technologies that perform a similar function to Cookies (e.g., tags, pixels, web beacons, etc.). Cookies can be read by the originating Website on each subsequent visit and by any other Website that recognizes the cookie. The Website uses Cookies in order to make the Website easier to use, to support a better user experience, including the provision of information and functionality to you, as well as to provide us with information about how the Website is used so that we can make sure it is as up to date, relevant, and error free as we can. Cookies on the Website We use Cookies to personalize your experience when you visit the Site, uniquely identify your computer for security purposes, and enable us and our third-party service providers to serve ads on our behalf across the internet.

We classify Cookies in the following categories:
 ●  Strictly Necessary Cookies
 ●  Performance Cookies
 ●  Functional Cookies
 ●  Targeting Cookies


Cookie List
A cookie is a small piece of data (text file) that a website – when visited by a user – asks your browser to store on your device in order to remember information about you, such as your language preference or login information. Those cookies are set by us and called first-party cookies. We also use third-party cookies – which are cookies from a domain different than the domain of the website you are visiting – for our advertising and marketing efforts. More specifically, we use cookies and other tracking technologies for the following purposes:

Strictly Necessary Cookies
These cookies are necessary for the website to function and cannot be switched off in our systems. They are usually only set in response to actions made by you which amount to a request for services, such as setting your privacy preferences, logging in or filling in forms. You can set your browser to block or alert you about these cookies, but some parts of the site will not then work. These cookies do not store any personally identifiable information.

Functional Cookies
These cookies enable the website to provide enhanced functionality and personalisation. They may be set by us or by third party providers whose services we have added to our pages. If you do not allow these cookies then some or all of these services may not function properly.

Performance Cookies
These cookies allow us to count visits and traffic sources so we can measure and improve the performance of our site. They help us to know which pages are the most and least popular and see how visitors move around the site. All information these cookies collect is aggregated and therefore anonymous. If you do not allow these cookies we will not know when you have visited our site, and will not be able to monitor its performance.

Targeting Cookies
These cookies may be set through our site by our advertising partners. They may be used by those companies to build a profile of your interests and show you relevant adverts on other sites. They do not store directly personal information, but are based on uniquely identifying your browser and internet device. If you do not allow these cookies, you will experience less targeted advertising.

How To Turn Off Cookies
You can choose to restrict or block Cookies through your browser settings at any time. Please note that certain Cookies may be set as soon as you visit the Website, but you can remove them using your browser settings. However, please be aware that restricting or blocking Cookies set on the Website may impact the functionality or performance of the Website or prevent you from using certain services provided through the Website. It will also affect our ability to update the Website to cater for user preferences and improve performance. Cookies within Mobile Applications

We only use Strictly Necessary Cookies on our mobile applications. These Cookies are critical to the functionality of our applications, so if you block or delete these Cookies you may not be able to use the application. These Cookies are not shared with any other application on your mobile device. We never use the Cookies from the mobile application to store personal information about you.

If you have questions or concerns regarding any information in this Privacy Policy, please contact us by email at . You can also contact us via our customer service at our Site.