Produkte
Double-Tank Ultrasonic Cleaner — Single-Control & Dual-Control
- Details zum Produkt
-
STANDARD SERIES · DOUBLE-TANK ULTRASONIC CLEANER
Double-tank ultrasonic cleaning machines — two chambers in one unit so the wash and the rinse (or rinse and hot-dry) happen in sequence without moving the parts to a separate station. The heated wash tank carries the ultrasonic transducers; the second tank provides clean rinse water or additional ultrasonic cleaning. Two control layouts are offered: single-control (S) with one shared control panel, and dual-control split (SF) with an independent control panel for each tank.
Product ParametersProduct Type Double-tank (two-chamber) industrial ultrasonic cleaner with heating Model FD-400330300S · FD-400330300SF Tank Quantity 2 tanks (wash + rinse) Tank Size (each) 400 L × 330 W × 300 D mm Transducers 12 pcs × 2 tanks Ultrasonic Power 600 W × 2 tanks Heating Power 2000 W × 2 tanks Control Layout Single control (S) or dual independent control (SF) Cleaning Method Ultrasonic cavitation + heated solution, then clean-water rinse Power Supply 220 V (confirm at order for your plant) Place of Origin Dongguan, Guangdong, China Selling Unit 1 set / unit Specifications are for reference. Tank size, tank quantity, transducer count, power and voltage can be customized — contact us for the full datasheet.
Single-Control (S) vs Dual-Control (SF)Item FD-400330300S · Single Control FD-400330300SF · Dual Control (Split) Control Panel One shared panel runs both tanks in sequence Separate panel for each tank, set individually Machine Format One-piece cabinet Split / separate body (分体) Best For One operator, one fixed wash→rinse routine Two different workloads, or rinse at a different temperature / time Transducers / Power 12 pcs × 2 · 600 W × 2 · 2000 W × 2 12 pcs × 2 · 600 W × 2 · 2000 W × 2 Both layouts share the same tank dimensions and heating capacity — the difference is purely how the two tanks are controlled and whether the body is one piece or split.
Accessories & Spare PartsCleaning basket × 1 per tank — lifts parts in and out without touching the tank floor
Lid / cover × 1 per tank — keeps heat in and reduces evaporation
Drain valve on each tank — for emptying wash solution and rinse water separately
Ultrasonic transducers — replaceable, bonded to the tank bottom
Heating elements — stainless steel immersion heaters, one per tank
Power cable and operation manual × 1
Baskets, lids and spare transducers are available separately. Tell us the parts you clean and the throughput you need, and we will recommend the right tank size and tank quantity.
User ManualOperating instructions, cleaning-solution guidance and maintenance manual
USER MANUAL PDFEnglish manual available. Chinese manual and wiring diagram available on request.
Product Demo Video
Contact us for a live working video or online demonstration.
Product OverviewApplication FieldsHardware & Machined Parts
Engine & Automotive Components
Mould & Die Cleaning
Batch Workshop Cleaning Lines
FeaturesWash + Rinse in One Unit
12 Transducers & 600 W per Tank
2000 W Heating per Tank
Two Independent Drain Valves
AdvantagesNo Second Machine Needed
Double Control Option (SF)
Factory Direct Price
Spare Parts & After-sales Support
Product Type · Double-Tank ModelsNeed more than two tanks, or a different tank sequence (wash → rinse → dry)? See the multi-tank page or send us your requirement.
Double-Tank Model ComparisonModel Tanks Transducers Ultrasonic Power Heating Power Control Tank Size (each) FD-400330300S 2 12 pcs × 2 600 W × 2 2000 W × 2 Single control 400 × 330 × 300 mm FD-400330300SF 2 12 pcs × 2 600 W × 2 2000 W × 2 Dual control, split body 400 × 330 × 300 mm Double-tank (custom) 2 On request On request On request On request Made to order Adding the second tank roughly doubles the ultrasonic power of the unit compared with a single-tank machine, and lets the parts go straight from the wash bath into a clean rinse without a separate rinse station.
Product Details
FD-400330300S overall view

Twin tanks

Control panel & timer

Heating & drain detail

Baskets & interior

SF split-body version

Tank interior detail

Layout drawing
Photographs are of standard models. Custom tank sizes may differ in appearance.
Application ScenariosWash + Rinse Line Parts come out of the heated ultrasonic bath and go straight into the clean rinse tank, so no dirty solution is carried onto the finished surface. Batch Throughput One basket can be washing while the previous batch is rinsing, which keeps the machine busy instead of idle between steps. Engine & Auto Parts Cleaning of cylinder heads, carburettor bodies, gearbox parts and other components with complex internal passages that brushes cannot reach. Mould & Die Cleaning Removal of release agent, burnt-on plastic and carbon deposits from injection moulds, followed by a clean-water rinse in the second tank. How To UseFill the first tank with cleaning solution and the second tank with clean rinse water — both to the working level. Never run a tank dry, the transducers and heater will be damaged.
Switch on the heating on the wash tank and set the working temperature for your soil type (typically 40–60 °C for degreasing).
Load the parts into the basket and lower it into the wash tank. Do not let parts rest directly on the tank bottom — this blocks the ultrasonic wave.
Set the cleaning timer (typically 5–20 minutes depending on soil and part complexity) and start the ultrasonic cycle.
Move the basket to the second tank for the rinse cycle. On the SF dual-control version the two tanks can be set to different times and temperatures.
Lift, inspect and dry. For rust-sensitive parts, apply a protective oil promptly after drying.
Drain and clean both tanks after use. Change the solution regularly — contaminated wash solution reduces cleaning efficiency and contaminates the rinse tank.
⚠ Safety notice: never operate the ultrasonic cleaner without liquid in the tank, keep hands out of the tanks while the ultrasonic power is on, use only cleaning agents compatible with stainless steel, and isolate the power supply before maintenance or draining.Need a double-tank cleaning solution?OEM / ODM available · Single-control or dual-control · Custom tank size and quantity · Factory direct from Dongguan, China · Spare parts supplied · Sample testing supportedGet a Quote
Verwandte Produkte
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
Produkt-Anfrage
Bitte hinterlassen Sie Ihre Nachricht, wir werden uns nach Erhalt schnell mit Ihnen in Verbindung setzen, vielen Dank für Ihre Unterstützung!
Häufiges Problem
Q
Was sind die Merkmale der Zigarettenschachtel dreidimensionale Verpackungsmaschine?
A
1. Es besteht keine Notwendigkeit, die Höhe der Arbeitsplatten auf beiden Seiten der Maschine einzustellen, wenn die Form gewechselt wird, und es besteht keine Notwendigkeit, die Auslasskette zu demontieren und zu montieren oder den Trichter zu setzen, was die vierstündige Formwechselzeit der traditionellen Maschine auf nur 30 Minuten verkürzt.
2. Durch den neuen Doppelversicherungsmechanismus muss die Maschine nicht abgeschaltet werden, wenn sie nicht synchron läuft, und es werden auch keine anderen Teile beschädigt.
3. Die originale Einweg-Handkurbelvorrichtung verhindert, dass die Maschine rückwärts wackelt, und das Handrad dreht sich während des Betriebs nicht, was den Bediener sicherer macht.
4. Das neue Doppelrotationsfolienschneidemesser kann sicherstellen, dass die Maschine viele Jahre lang ohne Schärföffnung ununterbrochen verwendet werden kann, wodurch der Mangel überwunden wird, dass die traditionelle feste Einzelrotationsfolienschneidklinge leicht zu verschleißen ist.
Q
Automatische Poker transparente Folie dreidimensionale Verpackungsmaschine Verpackungsprodukte?
A
Automatische Poker transparente Folie dreidimensionale Verpackungsmaschine ist vor allem geeignet für Bulk-Poker, komprimierte Kekse, Sachima, Aufkleber, Haftnotizen, Waffel Kekse und andere Bulk-oder Multi-Objekt-Sammlung von dreidimensionalen Verpackungen.
E-Mail Adresse:
Hotline:
English
繁体中文
简体中文
Deutsch
Tiếng Việt
