Produkte
Left-Lift CNC Automatic Dip Soldering Machine — FD861
- Details zum Produkt
-
AUTOMATIC SERIES · CNC-CONTROLLED AUTOMATIC DIP SOLDERING MACHINE (FD861 · LEFT-LIFT TYPE)
The FD861 is a left-lift CNC-Controlled Automatic Dip Soldering Machine. Its functions are up/down, a solder scraper, solder-surface detection, jump and left lift — the head lifts from the left side, which suits parts and fixtures that cannot be lifted straight up over the pot. It is supplied with tooling made to the part, so the same fixture is used part after part. Built to order by FD in Dongguan, Guangdong, China. In the trade the same machine is also called an automatic tin dipping machine, a CNC-Controlled Automatic Dip Soldering Machine or a lead tinning machine — "CNC" only describes the controller that runs the stored dip program; all these names refer to the same machine.
Product ParametersModel FD-861 Also Known As CNC-Controlled Automatic Dip Soldering Machine (Left-Lift) · Automatic Tin Dipping Machine · Automatic Tinning Machine Functions Up/down · solder scraper · solder-surface detection · jump · left lift Left Lift The head lifts from the left side of the pot Solder Scraper Solder-surface scraper Solder-Surface Control Automatic detection Specifications are as listed in our catalogue. Fixtures and the lift setting are adapted to your part — send us a sample part for a proposal.
Function SetLeft lift — the head lifts from the left side instead of straight up — useful where parts or fixtures would foul the pot on a vertical lift
Solder scraper — the solder surface is scrapped clean before the pin group enters it
Solder-surface detection — the machine detects the solder surface instead of assuming a fixed level
Jump function — the head can jump between positions on the fixture, so one program covers several pin groups
Up/down axis — the vertical motion is carried by the machine, not by the operator's hand
Tooling made to your part — the fixture is made to your drawing so the part sits square on every cycle
These are the standard functions of the FD861 platform as supplied. Function combinations can be adapted to your process — tell us your soldering sequence and we will quote a matching configuration.
Product OverviewApplication FieldsTransformer Pin Soldering
Inductor & Coil Leads
Multi-Point Fixtures
Repeatable Pin Finishing
FeaturesLeft-Lift Head
Solder Scraper
Solder-Surface Detection
Jump Between Positions
AdvantagesLift Path Clears The Pot
Clean Solder Every Dip
One Program, Several Pin Groups
Factory Direct from Dongguan, China
CNC-Controlled Automatic Dip Soldering Machine RangeThe CNC-Controlled Automatic Dip Soldering Machine range covers rotary, auto-scraper, solder-cup and left-lift models. Every machine is built to order in Dongguan, Guangdong, China — send us your part, pin layout and output per shift for a machine recommendation and quotation.
Product Details
FD861 overall view

Working area

Function diagram
Photographs are of the standard model. Fixtures are adapted to your part.
Product Demo Video
▶ Watch the working video →
Application ScenariosFixtures That Cannot Lift Straight Up Where a straight vertical lift would foul the pot or the fixture, the left lift takes the part out sideways and clears it. Several Pin Groups in One Fixture The jump function steps between positions on the fixture, so a program can cover more than one pin group in a cycle. Clean Solder Every Dip The scraper clears the solder surface before the part enters it, which is what keeps the coating even. Depth That Does Not Drift Surface detection follows the falling solder level through the shift instead of assuming a fixed height. How To UseLoad the fixture with your parts and set the platform for the batch.
Let the scraper clean the surface the solder surface is scrapped before the pin group enters it.
Dip with the left-lift head the head lowers the part into the pot and lifts out from the left side, clearing the pot on the way up.
Use jump for the next pin group the head moves to the next fixture position and repeats the dip in the same program.
Unload and repeat the stored program runs the same sequence for every part in the batch.
Keep the pot topped up and skimmed so the surface stays in condition; detection handles the rest.
⚠ Safety notice: molten solder operates at high temperature — never reach into the pot area while the machine runs, keep the work area dry (molten solder and water contact can cause splatter), use heat-resistant gloves during pot maintenance, and isolate the power supply before any service.Frequently Asked QuestionsQ1: What is a CNC-Controlled Automatic Dip Soldering Machine?
It is a machine that dips component pins into molten solder automatically instead of by hand, with the motion controlled by a stored program. The FD861 is a left-lift model — the head lifts from the left side of the pot. The same machine is also called an automatic tin dipping machine, a CNC-Controlled Automatic Dip Soldering Machine or a lead tinning machine — "CNC" only describes the controller that runs the stored dip program; all these names refer to the same machine.
Q2: What does "left lift" mean and when do I need it?
It means the head lifts the part out from the left side of the pot instead of straight up. It is used where a straight vertical lift would foul the pot or the fixture, or where the part has to be taken out along the fixture's opening.
Q3: What is the jump function for?
Jump moves the head between positions on the fixture, so one stored program can cover more than one pin group in a cycle instead of a separate run for each.
Q4: Can it be adapted to my part and fixture?
Yes. The machine is built to order in Dongguan, Guangdong, China and the fixture and lift setting are made to your part drawing. Send us your part, pin layout and output per shift for a configuration and quotation.
Q5: Is a working video available?
Yes — use the demonstration video link on this page, or ask us to send the current video for your part type.
Q6: Which industries use a left-lift dip soldering machine?
Transformer, inductor and coil makers, and workshops with fixtures or parts that cannot be lifted vertically out of a solder pot.
Need a dip soldering machine that clears your fixture?OEM / ODM available · Left-lift head · Solder scraper · Surface detection · Jump between fixture positions · Factory direct from Dongguan, ChinaGet a Quote
Verwandte Produkte
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
Produkt-Anfrage
Bitte hinterlassen Sie Ihre Nachricht, wir werden uns nach Erhalt schnell mit Ihnen in Verbindung setzen, vielen Dank für Ihre Unterstützung!
Häufiges Problem
Q
Was sind die Merkmale der Zigarettenschachtel dreidimensionale Verpackungsmaschine?
A
1. Es besteht keine Notwendigkeit, die Höhe der Arbeitsplatten auf beiden Seiten der Maschine einzustellen, wenn die Form gewechselt wird, und es besteht keine Notwendigkeit, die Auslasskette zu demontieren und zu montieren oder den Trichter zu setzen, was die vierstündige Formwechselzeit der traditionellen Maschine auf nur 30 Minuten verkürzt.
2. Durch den neuen Doppelversicherungsmechanismus muss die Maschine nicht abgeschaltet werden, wenn sie nicht synchron läuft, und es werden auch keine anderen Teile beschädigt.
3. Die originale Einweg-Handkurbelvorrichtung verhindert, dass die Maschine rückwärts wackelt, und das Handrad dreht sich während des Betriebs nicht, was den Bediener sicherer macht.
4. Das neue Doppelrotationsfolienschneidemesser kann sicherstellen, dass die Maschine viele Jahre lang ohne Schärföffnung ununterbrochen verwendet werden kann, wodurch der Mangel überwunden wird, dass die traditionelle feste Einzelrotationsfolienschneidklinge leicht zu verschleißen ist.
Q
Automatische Poker transparente Folie dreidimensionale Verpackungsmaschine Verpackungsprodukte?
A
Automatische Poker transparente Folie dreidimensionale Verpackungsmaschine ist vor allem geeignet für Bulk-Poker, komprimierte Kekse, Sachima, Aufkleber, Haftnotizen, Waffel Kekse und andere Bulk-oder Multi-Objekt-Sammlung von dreidimensionalen Verpackungen.
E-Mail Adresse:
Hotline:
English
繁体中文
简体中文
Deutsch
Tiếng Việt

