产品
YH-3203H High-Frequency Lead-Free Soldering Station
- 产品详情
-
SOLDERING STATION SERIES · YH-3203H HIGH-FREQUENCY LEAD-FREE SOLDERING STATION
The YH-3203H is a High-Frequency Lead-Free Soldering Station for bench soldering on lead-free production lines and rework benches. Power is selectable at 90 W / 120 W on 220 V, and the front panel carries a digital temperature display with push-button setting and a CAL adjustment point. The unit is built for lead-free work and carries the LEAD FREE and ESD SAFE markings on its housing. Also listed as a high frequency soldering station, an ESD soldering station or a digital lead-free soldering station.
Product ParametersModel YH-3203H — High-Frequency Lead-Free Soldering Station Also Known As High-Frequency Lead-Free Soldering Station · High Frequency Soldering Station · ESD Soldering Station · Digital Lead-Free Soldering Station Power 90 W / 120 W Voltage 220 V Temperature control Digital display with push-button setting, CAL adjustment point Design markings LEAD FREE · ESD SAFE Carton size 47.5 × 27.3 × 45 cm Packing quantity 6 pcs per carton Weight 20.76 kg (catalogue figure, packing qty 6) Temperature range Set against your process — confirmed with the quotation Carton size, packing quantity and weight are factory-catalogue packing figures. Working temperature range is set with the order.
Function SetDigital temperature control — set the working point on the display instead of guessing at a dial, so every operator on the bench runs the same temperature.
Two power levels, 90 W / 120 W — run the lower level for fine work and step up when joints pull heat away from the tip.
High-frequency heating — the heating principle these stations are named for warms the tip quickly and helps the tip recover its temperature between joints.
Lead-free ready — marked LEAD FREE on the housing and built for the higher working temperatures that lead-free solder asks for.
ESD-safe design — marked ESD SAFE, for benches where static-sensitive assemblies are handled.
CAL adjustment point — trim the displayed temperature against a tip thermometer during maintenance so the whole bench set stays consistent.
Product OverviewApplication Fields Features Advantages Lead-free production lines, transformer and inductor tinning benches, repair and rework stations, laboratories and training workshops. 90 W / 120 W power levels, digital display with push-button setting, CAL adjustment, 220 V supply, ESD-safe housing. A bench station that holds its set temperature on repetitive lead-free joints, with a display the whole team can read at a glance. Soldering Station RangeReplacement 936-type soldering tips in A / 1.2D / 2.4D / K profiles are held in stock — ask for the tip list with your enquiry.
Product DetailsImage slot 1
Overall view — upload the YH-3203H photograph here
Image slot 2
Digital panel detail — upload the YH-3203H photograph here
Image slot 3
With iron and stand — upload the YH-3203H photograph here
Photograph slots are reserved for this model. Upload the photographs to the mall listing, then replace each placeholder with the image URL (see TODO 3).
Application ScenariosLead-free production Hand soldering on SAC-alloy lines where the set temperature must hold while operators work joint after joint; the digital panel keeps every bench on the same setting. Rework and repair Component replacement, wire tinning and touch-up work on assemblies that must stay static-safe; the ESD-safe design fits protected bench areas. Labs and training A clear digital readout and simple push-button setting make the station easy to run in laboratories, schools and training benches. How To UsePlace the station on a level, ESD-protected bench and connect the iron holder.
Connect the soldering iron to the panel socket and plug the station into a 220 V outlet.
Switch on and set the working temperature with the panel buttons for the alloy you use.
Wait for the display to reach the set point, then tin the tip with fresh solder.
Solder with a clean, tinned tip; wipe on the brass or sponge of the holder between joints.
After the shift, re-tin the tip, switch off, and check the CAL setting during scheduled maintenance.
Safety note: the tip and the barrel reach working temperatures above 200 °C. Return the iron to its holder between joints, keep the power cord and handle cable away from the tip, and never leave a hot station unattended.
FAQQ1: What is the difference between the 90 W and 120 W settings?
A: The catalogue lists 90 W / 120 W as the two power ratings of the station. Run the level that suits your joint size; the working point is the temperature you set on the panel, and both ratings are specified on 220 V.
Q2: Is the YH-3203H suitable for lead-free solder?
A: Yes. The station is marked LEAD FREE on the housing and is built for the higher working temperatures that lead-free alloys need.
Q3: What does ESD SAFE mean on this station?
A: The unit carries the ESD SAFE marking, meaning it is designed for benches that handle static-sensitive assemblies. Confirm your earthing scheme with the quotation if your line has a monitored ESD program.
Q4: What working temperature range does it cover?
A: The catalogue sheet does not print a numeric range, so we do not quote one here. Tell us your alloy and joint size and the working range is confirmed with the quotation.
Q5: How is the station packed for export?
A: Packed 6 pcs per carton, carton size 47.5 × 27.3 × 45 cm, catalogue weight 20.76 kg per carton.
Q6: Can the temperature calibration be adjusted?
A: Yes. The panel has a CAL adjustment point so the displayed temperature can be trimmed against a tip thermometer during maintenance.
Need a quotation for the YH-3203H High-Frequency Lead-Free Soldering Station?
Tell us your alloy, joint size and daily output — we reply with a matched model, tip list and price.
Get a Quote
相关产品
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder po...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder po...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder po...
产品询价
请留言,我们收到后会迅速与您联系,感谢您的支持!
常见问题
问
香烟盒三维包装机特点?
答
问
全自动扑克透明膜三维包装机包装产品?
答
全自动扑克透明膜三维包装机主要适用于散装扑克、压缩饼干,沙琪玛、报事贴、便笺纸、威化饼干等散状或多件物体集合的三维包装。
English
繁体中文
简体中文
Deutsch
Tiếng Việt
