产品
Semi-Automatic Dip Soldering Machine — FD599 Series (Solder Cup & Scraper Set)
- 产品详情
-
SEMI-AUTOMATIC SERIES · SEMI-AUTOMATIC DIP SOLDERING MACHINE (FD599 · SOLDER CUP & SCRAPER SET)
The FD599 series is a Semi-Automatic Dip Soldering Machine supplied as a matched set of solder pot, solder scraper and soldering bracket, in four build-ups: pot with scraper (600), pot with scraper and bracket (601), pot with scraper and a solder cup (603), and pot with scraper and a side solder cup (604). The operator loads the fixture by hand and the bracket carries the part through the dip, so the part meets the solder the same way on every cycle. The solder cup is what separates this series from a plain dip set: instead of lowering the whole part flat into the pot, the cup brings solder up to the pin group, which suits parts that stand upright in the fixture and pin groups that sit on a face of the part. Supplied as a set by FD in Dongguan, Guangdong, China. In the trade the same set is also called a semi-automatic tin dipping machine or a solder cup dipping machine — all these names refer to the same set.
Product ParametersModel FD599 series — 600 / 601 / 603 / 604 Also Known As Semi-Automatic Dip Soldering Machine · Semi-Automatic Tin Dipping Machine · Solder Cup Dipping Machine Type Solder pot + scraper + bracket set, with solder cup Delivered Build-Ups 600 pot + scraper · 601 pot + scraper + bracket · 603 pot + scraper + solder cup · 604 pot + scraper + side solder cup Solder Cup Top cup on the 603 build-up, side cup on the 604 build-up Solder Pot Confirmed against your order — pot size is selected with the build-up Operation Semi-automatic — operator loads and unloads, the bracket carries the part through the dip Suitable Products Parts held upright in fixtures, transformer & inductor pin groups, side-facing pin rows Specifications are as listed in our catalogue. Send us your part and pin layout and we will confirm the pot size, the cup position and the bracket for your build-up.
Function SetSolder cup (603) — a cup brings molten solder up to the pin group from below, instead of lowering the whole part flat into the pot
Side solder cup (604) — the cup sits to the side of the pot, for pin rows that face sideways in the fixture
Solder scraper — skims the oxide skin off the solder surface, so the pins meet clean solder instead of dross
Soldering bracket (601) — holds the part and its pins square to the solder while they are dipped
Solder pot — the pot is the base of every build-up; size is confirmed with the order
Semi-automatic cycle — the operator loads and unloads and the bracket repeats the same travel, so the tinned length does not depend on the operator's hand
Four build-ups — start with the pot and scraper and add the bracket, the top cup or the side cup to match your part
The build-ups share the same pot and scraper, so a set can be extended later by adding the bracket or the cup rather than replacing the machine.
Product OverviewApplication FieldsUpright Parts in Fixtures
Transformer & Inductor Pins
Side-Facing Pin Rows
Small-Batch Mixed Production
FeaturesTop Solder Cup or Side Solder Cup
Solder Scraper Included
Soldering Bracket Included
Pot, Scraper and Bracket as One Set
AdvantagesReaches Pin Groups a Flat Dip Cannot
Four Build-Ups, One Base Set
Extend Later Instead of Replacing
Factory Direct from Dongguan, China
Semi-Automatic Dip Soldering Machine RangeThe Semi-Automatic Dip Soldering Machine range covers microcontroller machines, bracket-and-pot sets and solder cup sets. Every set is built to order in Dongguan, Guangdong, China — send us your part, pin layout and output per shift for a machine recommendation and quotation.
Product Details
FD599 series overall view

Solder cup detail

Pot and scraper
Photographs are of the standard set. Bracket and cup position are adapted to your part.
Product Demo Video
▶ Watch the working video →
Application ScenariosUpright Parts in Fixtures When a part stands upright in the fixture, the solder cup brings solder up to the pins instead of asking the whole part to be laid flat into a pot. Side-Facing Pin Rows The 604 side cup reaches pin rows that face sideways in the fixture and cannot be brought over the top of a pot. Transformer & Inductor Pins Common transformer and inductor leads are dipped with the bracket, with the scraper keeping the solder surface clean between cycles. Growing Production Because the build-ups share one pot and scraper, a workshop can start with the 600 and add the bracket or the cup when the next product needs it. How To UseLoad the fixture with your part and set it upright, or at the angle the pin rows need.
Apply flux to the pin group before the part moves to the cup or the pot.
Bring the cup to the pins on the 603 and 604 build-ups the cup carries solder up to the pin group rather than the part going down into the pot.
Dip on the flat pot on the 600 and 601 build-ups the bracket carries the part into the pot over the scraper.
Unload and repeat the same travel applies to the whole batch, so the tinned length stays consistent.
Keep the pot topped up and skimmed so the solder surface stays clean through the shift.
⚠ Safety notice: molten solder operates at high temperature — never reach into the pot or cup area while the set is in use, keep the work area dry (molten solder and water contact can cause splatter), use heat-resistant gloves during pot maintenance, and isolate the power supply before any service.Frequently Asked QuestionsQ1: What is a Semi-Automatic Dip Soldering Machine?
It is a machine that dips component pins into molten solder with the dipping carried out by the machine and the loading and unloading done by an operator. On the FD599 series the soldering bracket carries the part and the scraper keeps the solder surface clean, so the tinned length is repeatable instead of depending on the operator's hand. The same set is also called a semi-automatic tin dipping machine or a solder cup dipping machine — all these names refer to the same set.
Q2: What is a solder cup and why use one?
A solder cup brings molten solder up to the pin group from below or from the side. It is used when the part cannot be laid flat into a pot — typically a part that stands upright in its fixture, or a pin row that faces sideways. The 603 build-up uses a top cup and the 604 build-up uses a side cup.
Q3: How do I choose between the four build-ups?
By how the part has to meet the solder. The 600 is the pot with the scraper; the 601 adds the soldering bracket for parts that go down into the pot; the 603 adds a solder cup for upright pin groups; the 604 replaces the cup with a side cup for pin rows that face sideways. All four share the same pot and scraper base.
Q4: What is the solder pot size?
The pot is selected with the build-up rather than being fixed across the series. Send us your part and pin layout and we will confirm the pot size, the cup position and the bracket that suit your part before quoting.
Q5: Can the set be made for my part?
Yes. The set is built to order in Dongguan, Guangdong, China, and the bracket, the cup position and the tooling are made to your part drawing. Send us your part, pin layout and output per shift and we will propose the configuration and quotation.
Q6: Which industries use a solder cup set like this?
Transformer, inductor and magnetic-ring makers, plus any workshop soldering upright parts or side-facing pin rows in batches — wherever a flat dip cannot reach the pin group and the volume does not justify a full automatic line.
Need to solder pin groups a flat dip cannot reach?OEM / ODM available · Top or side solder cup · Solder pot + scraper + bracket · Four build-ups from one base set · Factory direct from Dongguan, China · Fixture drawing on requestGet a Quote
相关产品
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder po...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder po...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder po...
产品询价
请留言,我们收到后会迅速与您联系,感谢您的支持!
常见问题
问
香烟盒三维包装机特点?
答
问
全自动扑克透明膜三维包装机包装产品?
答
全自动扑克透明膜三维包装机主要适用于散装扑克、压缩饼干,沙琪玛、报事贴、便笺纸、威化饼干等散状或多件物体集合的三维包装。
English
繁体中文
简体中文
Deutsch
Tiếng Việt


